User's Manual

Yellow sign on the adapter, it shows the installation is not successful. In this case, select

the adapter and click on Remove. Restart your computer after uninstalling the driver to

make the changes effective. (See the Adapter Removal in section 3.7)

7. Of the icons displayed on the right bottom of desktop, click on icon stated

Wireless Network Connection.

8. When you are using DHCP, just select the AP that you want to connect in the Connect

to Wireless Network above.

9. To manually set your IP address, WEP and some other configuration, click on

Advanced of the above picutre and then click Configure Available networks on the

Wireless Networks Tab . Set the SSID and parameters to be needed to modify and

then clicking on OK. The AP that you selected will be displayed on the Prefered

Networks.