User's Manual Part 2

z Model: It shows the name of model.
z Version: It shows the version of AP.
z Description: It is the name of AP designated by AP manager during AP setup.
z NAT: It shows whether the private IP address (NAT server) is enabled or not.
z DHCP: It shows whether the DHCP sever is enabled or not.
z Clients number: It shows the number of users currently connected with the AP.
z Internet connection: It is the connection type with outer network (LAN, ADSL,
ISDN etc.).
z IP Address: It shows whether the IP address is from DHCP server or NAT
server.
z Connected Status: In case the connection type with the outside network is of
ADSL/CABLE type, it shows the connection state between AP and ASP service.
z IP: It is the IP address of the AP.
5.2.3 The ‘Site Survey’ button
It finds you the AP/Station that are connected currently. (It takes a few seconds to be
done)
z Signal: It shows the connection state of Stations with AP or Master Station.
z Rate: It shows the Tx Data rates.
z WEP: It shows security state with the AP.
z BSSID: It represents the Physical Address of AP in the Infrastructure Mode and