User's Manual

43
PEAP requires a Username and a Server Name; enter this information in the appropriate
fields on your screen. With PEAP, you can use a client certificate for authentication
with the server. To use a client certificate, click in the check box next to the Use client
certificate field and then highlight a certificate from the list to select it.
Clicking next to the Allow intermediate certificate authority field lets you receive
certification credentials from any authentication server authorized to provide
authentication services by the server named in the Server Name field. Clicking next to
the Allow subdomains field allows you to receive certification from an authorized server
on any subdomain in your network.
Tunneled authentication requires a Username and Password (which you can enter in the
appropriate fields in this menu), and an authentication method. To choose a method,
click the down arrow next to the Authentication field, and then click on the method in
the displayed list that you wish to use.
With PEAP authentication, you can also enable WPA (WiFi Protected Access) for
enhanced encryption. Clicking the check box next to Enable WPA enables WPA with
PEAP authentication.
.
TLS/Smartcard Authentication
When you choose TLS/Smartcard as the authentication type, a menu similar to the
following appears: