User's Manual

1. Introduction

Thank you for your purchase of SAMSUNG Wireless LAN. Installing this cards allow

the computer to join a wireless network based on the IEEE 802.11b/g (High Data Rate)

WLAN standard. You will be surprised how easy for you are a part of the network with

no bother of twisted cables.

1.1 Technical Background

• What is IEEE 802.11?

The IEEE 802.11 specification is a wireless LAN standard developed by the IEEE

(Institute of Electrical and Electronic Engineering) committee in order to specify an

over an air interface between a wireless client and a base station or Access Point (AP),

as well as among wireless clients. Like other IEEE 802 families, IEEE 802.11

specification addresses both Physical (PHY) layer and Media Access Control (MAC)

layer.

• IEEE 802.11 Physical (PHY) Layer

At the PHY layer, IEEE 802.11 defines three physical characteristics for WLAN:

diffused infrared, direct sequence spread spectrum (DSSS), and frequency hopping

spread spectrum (FHSS). While the infrared PHY operates at the baseband, the other

two PHYs operate at the 2.4GHz ISM (Industrial, Scientific, and Medical) band, which

can be used for operating wireless LAN devices without the need of end-user licenses.

In order for wireless devices to be interoperable, they have to be conforming to the same

PHY standard.

• IEEE 802.11 Media Access Control (MAC) Layer

The IEEE 802.11 MAC Layer is mainly concerned with the rules for accessing the

wireless medium. There are two network architectures defined: Ad-hoc Network and

Infrastructure Network.

• Ad-hoc Network

Ad-hoc Network is an architecture that supports mutual communication among wireless

clients only. Since Ad-hoc Network does not support access to wired networks, it does

not need an Access Point to be a part of the network. You can use the network

immediately after setting up the operating mode by installing the supplied network