User's Manual

ENGLISH
The Camcorder : Playback
7474
Playing Back a Recorded Tape

The tape playback functions work only in PLAY mode.

It is handy and practical to view a tape using the LCD monitor almost anywhere (i.e. in a car, indoors, or outdoors).

To display a recorded tape on a TV, the television set needs to comply with the Color System (NTSC/PAL).

It is recommended to use the AC Power Adapter and Cable as the power source for the camcorder.
For instructions on connecting the AC Power Adapter and Cable to your camcorder, refer to page 27.

Refer to page 138 for instructions on connecting your camcorder to a TV set.
1. Connect a power source and set the device to PLAY mode by setting the Power Switch to PLAY
mode.
2. Using the (FF) and (REW) buttons, find the beginning of the section you want to play back.
3. Press the (PLAY/STILL) button to start the playback.
The recorded video is displayed on the selected monitor (LCD monitor / TV)
If a tape reaches its end, the tape will automatically rewind.
4. Press the (PLAY/STILL) button again to stop the playback.

The playback mode (SP/LP) is automatically selected.
Playback on the LCD Monitor
Playback on a TV Monitor
Playback
Note
OFF
O
F
F
O
F
F
R
E
C
P
L
A
Y
OFFO
F
F