User's Manual

ENGLISH
The Camcorder : Playback
7878
Dubbing an Additional Sound Track to Your Recording

Audio Dubbing works only in PLAY mode.

You can dub additional audio to your recordings using the remote control. Dubbing is supported only when the recorded
image has been recorded in SP (Standard Play) mode using the 12-bit settings for audio.

This function is useful for adding additional background music or sound effects to your recordings. The original sound will not
be erased.
1. Turn your camcorder on by setting the Power Switch to PLAY mode.
2. Move to the desired starting position of the recorded video using (REW), (FF)
or (PLAY/STILL) buttons.
3. Press the (PLAY/STILL) button at the starting point.
4. Press the A.DUB button on the remote control.

The “A.DUB” message appears on the LCD monitor and the camcorder is ready
for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
6. To stop the audio dubbing, press the
(STOP)
button.

Audio Dubbing is not available when using protected tapes. To release the protection, refer to page 49.

Audio Dubbing is not available for recordings using 16-bit sound.

Audio Dubbing is not available for recordings made in LP mode.

To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable for external sound
source input.

To dub an external sound source, set the AV Input/Output function to AV IN (refer to page 141).
Dubbing the Sound
Notes
START/
STOP
SELF
TIMER
A.DUB
ZERO
MEMORY
PHOTO DISPLAY
X2
SLOW
PHOTO
SEARCH
DATE/
TIME