User's Manual

ENGLISH
The Camcorder : Playback
7979
Playing Dubbed Sound
You may select the audio track to be played back.
1. Turn your camcorder on by setting the Power Switch to PLAY mode.
2. Press the MENU button.

The top menu including “A/V” is displayed.
3. Press the DOWN button to select “A/V” then press the OK button.

The submenu including “AUDIO SELECT” is displayed.
4. Press the DOWN button to select “AUDIO SELECT” then press the OK button.

The available AUDIO SELECT options are listed.
- SOUND[1]: Main Audio Track only, plays only the original audio.
- SOUND[2]: Additional Audio Track only, plays only the dubbed audio.
- MIX[1+2]: Mixed Audio Tracks, plays both the original and the dubbed audio.
5. Select your option by pressing the DOWN or UP button then press the OK button.

The selected option is applied.
6. Press the MENU button to exit the menu screen.
7. Press the (PLAY/STILL) button to begin the playback.

The selected Audio Tracks are played back.
8. To stop the playback, press the (PLAY/STILL) button again.
PLAY MODEPLAY MODE STOP
INITIAL
CAMERA
A/V
VIEWER
WIND CUT
PB DSE
AV IN/OUT
OUT
REC MODE
PHOTO SEARCH
AUDIO MODE12bit
AUDIO SELECT
PLAY MODEPLAY MODE
A/V SET
STOP
WIND CUT
PB DSE
AV IN/OUT
OUT
REC MODE
PHOTO SEARCH
AUDIO MODE
AUDIO SELECT
12bit
SOUND 1