User's Manual

ENGLISH
The Camera : Functions
8686
Numbering Stored Pictures

File numbers will be automatically given, in the order they were recorded, to pictures taken and stored in the Memory Card.
By default, pictures are stored on the memory card in a folder labeled 100SSCAM, with four-digit file numbers, starting from
DCAM0001.

You can reset the numbering back to DCAM0001 at any time by setting the FILE to RESET.
1. Turn your camcorder on by setting the Power Switch to (CAMERA) mode.
2. Press the MENU button.

The top menu including (SET) is displayed.
3. Press the LEFT or RIGHT button to select (SET) then press the DOWN button.

The submenu including “FILE” is displayed.
4. Press the DOWN or UP button to select “FILE” then press the RIGHT button.

The RESET and SERIES options are displayed and RESET is highlighted.
5. Highlight your option by pressing the DOWN or UP button then press the MENU button.

The selected option is applied and automatically exits from the menu screen.

RESET: When selected, the file number of the next picture is set to DCAM0001.

SERIES: Continues the numbering.

The file numbers start from DCAM0001 at the time of purchase.

MPEG motion clips are stored in the folder DCIM.

File numbering for a Memory Card that contains image files from another device, will begin after the largest number.

File numbering restarts from 0001 when 9999 files have been saved.

A previously formatted Memory card using a personal computer might require reformatting.

Each folder can contain up to 9999 images. A Memory Card may contain up to 999 folders. “DCF FULL ERROR” message is
displayed when it exceeds the limit.
OFF
O
F
F
R
E
C
P
L
A
Y
OFFO
F
F
O
F
F
Notes