User's Manual

ENGLISH
The Camera : Functions
9292
Setting the IMPRINT Option

IMPRINT allows the user to place a date stamp on a picture. Your camera has a built-in clock that maintains the date and
time in a 24-hour format. The camera clock needs to be set if you plan to use the date stamp to imprint the date and time on
your picture.
Before you begin!

Set the CLOCK (refer to the previous page).
1. Turn your Camera on by setting the Power Switch to (CAMERA) mode.
2. Press the MENU button.

The top menu including (SET) is displayed.
3. Press the LEFT or RIGHT button to select the (SET) then press the DOWN button.

The submenu including “IMPRINT” is displayed.
4. Press the DOWN button to select the “IMPRINT” then press the RIGHT button.

The available options: OFF, Date and DATE&TIME are displayed.
5. Select an option by pressing the UP or DOWN button then press the OK button.

The selected option is applied.
6. Press the MENU button to exit the menu screen.

A separate clock setting for Camera mode is required. For further information on Date & Time setup for the Camcorder, refer
to page 38.

If you remove the batteries from the camera for an extended period of time, or the batteries become run out, you may need
to reset the clock.
OFF
O
F
F
R
E
C
P
L
A
Y
OFFO
F
F
O
F
F
SETUP
FILE
LANGUAGE
FORMAT
LCD
USB
RESET
ENGLISH
NO
NORMAL
PRINTER
SETUP
USB
DATE&TIME
IMPRINT
WL.REMOTE
BEEP SOUND
OFF
DATE
DATE&TIME
Notes