User's Manual

ENGLISH
The Camera : Basic Picture Taking
100100
Deleting Recorded Pictures

You can delete previously stored images either one at a time or all at once.
1. Load a memory card that has previously stored pictures (refer to page 96).
2. Turn your camera on by setting the Power Switch to (CAMERA) mode.
3. Turn the Mode Dial to set the (PLAY) mode.

A stored picture is displayed on the LCD monitor.
4. Choose a stored picture to be deleted by pressing the LEFT or RIGHT button.
5. Press the (DELETE) button to delete the selected picture.

The message “DELETE?” and the available options are displayed.
6. Press the OK button to delete the picture, or press the LEFT button to cancel.

If deleted, the next or the last picture stored is displayed. If Delete is cancelled, it returns to the picture screen.

When there is no stored picture on the memory card, the message “NO IMAGE!” will be displayed.

If an erroneous memory card format is found on the memory card, the message “CARD ERROR!” will be displayed.

If an erroneous image file is found on the memory card, the message “FILE ERROR” will be displayed. It may be caused by
copying images from different digital devices.

Formatting the memory card will delete all the stored images.
Notes
Deleting One Image in Single Image View