User's Manual

ENGLISH
The Camera : Basic Picture Taking
102102
Delayed Shooting – Self Timer

Using the remote control, delaying the shutter release (in order to take self-photography and various other camera uses) is
available.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Turn the Mode Dial to set AUTO, A, S, M, or SCENE mode.
3. Press the MENU button.

The top menu including “SELF TIMER” is displayed.
4. Press the LEFT or RIGHT button to select “SELF TIMER” then press the DOWN button.

The available options of OFF, 2s SELF and 10s SELF are listed.
5. Select an option by pressing the DOWN or UP button then press the OK button.

The selected option is applied and the corresponding indicator appears on the LCD monitor.
6. Press the SELF TIMER button on the Remote Control until the desired option is displayed on the
LCD monitor.
10s : Delays the shutter release by 10 seconds.
7. Frame your subject.
8. Press the PHOTO button on the Remote Control to start the timer.

After the time indicated, the shutter is released.

Do not obstruct the remote control sensor by putting obstacles between the remote control and camera.

The remote control range is 4 ~ 5m (13 ~ 17 ft).

The effective remote control angle is up to 30 degrees left / right from the center line.

Using a tripod is recommended for delayed shootings.
START/
STOP
SELF
TIMER
A.DUB
ZERO
MEMORY
PHOTO DISPLAY
X2
SLOW
PHOTO
SEARCH
DATE/
TIME
Notes