User's Manual

ENGLISH
The Camera : Basic Picture Taking
103103
Taking Motion Clips (MPEG) Using the Camera

You can record a motion clip onto the memory card using (CAMERA) mode.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Set the Mode Dial to the (MOVIE).

The indicator appears on the LCD monitor.
3. Press the MENU button.

Setting up the MPEG Resolution
1. Press the LEFT or RIGHT button to select (SIZE) then press the DOWN button.

The available options are listed: 640x480, 320x240
2. Select an option by pressing the DOWN or UP button then press the OK button.

The selected option is applied.

Setting up the MPEG Quality
1. Press the LEFT or RIGHT button to select (QUALITY) then press the DOWN button.

The available options are listed: HIGH, LOW
2. Select an option by pressing the DOWN or UP button then press the OK button.

The selected option is applied.

Setting up the MPEG Frame Ratio
1. Press the LEFT or RIGHT button to select (FRAME RATIO) then press the DOWN
button.

The available options are listed: 15fps, 30fps
2. Select an option by pressing the DOWN or UP button then press the OK button.

The selected option is applied.
SIZE
640X480 640
320X240 320
QUALITY
HIGH
LOW
FRAME RATIO
30fps 30fps
15fps 15fps
Preparation – Setting the Resolution, Quality and Frame Ratio