User's Manual

ENGLISH
The Camera : Basic Picture Taking
104104

You can record movies with sound (recorded via the camera’s built-in microphone) using the (MOVIE) mode.

Before recording a motion clip, insert a Memory Card (refer to page 84).
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Turn the Mode Dial to (Movie).

Movie mode indicator is displayed and it is ready for recording. Recordable time using the memory card is displayed.
3. Frame your subject then press the START/STOP button to start recording.

The Time Counter starts counting and begins the recording.
4. To pause the recording for a while, press the (PLAY/STILL) button. To resume recording, press the (PLAY/STILL)
button again. To stop recording, press the START/STOP button again.

You can use the Remote Control for Motion Clip recording.
1. Follow Steps 1 ~ 2 above for the normal recording of Motion Clips.
2. Frame your subject then press the START/STOP button on the Remote Control.

The Time Counter starts counting and the recording begins.
3. To stop recording, press the START/STOP button.

To use an external microphone, connect a microphone to the MIC jack on the right front side of your camera.

It is recommended to use a tripod for Motion Clip recordings with the Remote Control. It is also handy for self recordings.

The recorded motion clip is saved in AVI format.
Notes
Recording a Motion Clip (MPEG) onto a Memory Card