User's Manual

ENGLISH
The Camera : Advanced Techniques
106106
Setting the Focus

In Camera modes, the automatic focus will not engage unless the PHOTO button is pressed halfway down.

To get good image quality, please verify the focus is set properly before fully depressing the PHOTO button.

While the camera is focusing (when pressing the PHOTO button halfway down), a flashing icon ( ) will appear on the LCD
monitor.

A sound effect will play once the focus is set.
1. Frame your subject inside the AF focus area on the LCD monitor in order to obtain the clear focus.
2. Press the PHOTO button halfway down to adjust the focus.

When the focus is set, a sound effect will play.

You can maintain focus by continuing to press the PHOTO button halfway down in order to
change your framing. This is useful when your main subject is not located in the center area of
your frame.
3. Press the PHOTO button firmly to take the picture.

If the focus is not properly set, release the PHOTO button and then press the PHOTO button
halfway down again.

Use MACRO mode for recording images at closer range under 30cm or 12 inches, or proper focusing will not occur.

To obtain an intentional blurring effect on the image, use the MF (Manual Focus) button to set the focus.
Notes
001
2592
08:21 AM
2004.01.03
MS
001
2592
08:21 AM
2004.01.03
MS
001
2592
08:21 AM
2004.01.03
MS