User's Manual

ENGLISH
The Camera : Advanced Techniques
118118

Digital Cameras capture an image using a CCD (Charge Coupled Device) that takes in lighting
information and detects the color.

The color balance may vary depending on the lighting conditions; white balance is used to
preserve natural colors under different lighting conditions.

You can set the white balance in A, S, and M modes.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Press the Navigation Wheel once.

The indicator and the Exposure Control Bar appear on the LCD monitor.
3. Press the UP or DOWN button to select White Balance.

The White Balance control bar appears while the current setting is highlighted in red.
4. Press the LEFT or RIGHT button to select the desired White Balance setting.

The selected option is highlighted in red.
5. Press the Navigation Wheel again to apply your selection and exit the setting screen.

The selected option’s indicator appears on the LCD monitor.

Setting the White Balance may produce different color balances.

AWB (Auto White Balance) mode helps to have natural colors under most cases.

Changing the camera mode cancels the current White Balance setting.

Using EASYQ mode cancels the White Balance setting.
Setting the Preset White Balance
H L
000
2592
MS
A
F4. 8
ISO
AUTO
AWB
000
2592
MS
S
F4. 8
ISO
AUTO
01:09 PM
2004. 01. 03
Notes
Manual Glow
Lamp
Halogen Fluorescent Cloudy Sunny AUTO
AWB
H L
HL
Setting the White Balance