User's Manual

ENGLISH
The Camera : Advanced Techniques
126126

To Recall your MySET configuration at a later time, follow these steps:
1. Turn your camcorder on by setting the Power Switch to (CAMERA) mode.
2. Set the Mode Dial to MySET.
3. Press the MENU button.

The top menu including (MySET) is displayed.
4. Press the LEFT or RIGHT button to select (MySET).

The submenu including “LOAD” is displayed.
5. Press the DOWN or UP button to select MySET1, MySET2 or MySET3.

The memorized settings are recalled.
6. Press the OK button to save then press the MENU button to exit the menu screen.
SAVE
MYSET 1
MYSET2
MYSET3
LOAD
MYSET 1
MYSET2
MYSET3
Loading Your Customized Settings