User's Manual

ENGLISH
The Camera : Advanced Techniques
127127
Customizing Your Camera – Changing the Start-Up Image

This function works in (CAMERA) modes.

This function changes the starting image that is displayed when the camera is turned on.

Resized still images saved in “LOGO” size are available to be your new start-up image (refer to page 130).
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Set the Mode Dial to any camera modes then press the MENU button.

The top menu including the (MYCAM) is displayed.
3. Press the LEFT or RIGHT button to select (MYCAM).
4. Press the DOWN button to select your starting image.
5. Press the OK button to save then press the MENU button to exit the menu screen.

Starting images should be saved in “LOGO” size.

Formatting or deleting the still picture on the memory card does not affect the start-up images. Start-up images are saved in
the built-in internal memory of the Camera.
Notes
MYCAM
OFF
START IMAGE 1
START IMAGE 2
START IMAGE 3