User's Manual

ENGLISH
Miscellaneous Information
133133
Printing Your Pictures – Using the PictBridge

By connecting the camera to printers with PictBridge support (sold separately), you can send images from the memory card
directly to the printer with a few simple operations using the camera buttons.

With the PictBridge Support, you can control the printer directly through your camera in order to print out stored pictures. For
direct printing of your stored pictures using the PictBridge function, it is required to connect your camera to a PictBridge
printer using a USB cable.
1. Turn your printer power off.
2. Turn your camera on by setting the Power Switch to (CAMERA) mode.
3. Set the Mode DIAL to (PLAY) mode then press the MENU button.

The top menu including (SETUP) is displayed.
4. Press the LEFT or RIGHT button to select (SETUP) then press the DOWN button.

The submenu including “USB” is displayed.
5. Press the DOWN or UP button to select USB then press the RIGHT button.

The available options are listed: “COMPUTER” and “PRINTER”.
6. Select the “PRINTER” then press the MENU button.
7. Press the MENU button again to exit the settings screen.
8. Connect your camera to the printer using the provided USB cable.
9. Turn your printer power on.

The PictBridge connection screen appears. The message “PLEASE WAIT…” appears and
PictBridge menu screen appears.

You can set following options under PictBridge menu:
PLEASE WAIT
Connecting To a Printer
IMAGES
PRINTER SETUP
PRINT
DPOF AUTO P.
RESET
Sets the images to be printed
Sets up various printing options
Starts the printing
DIGITAL PRINT ORDER FORMAT, refer to page 137
Recalls the PictBridge Factory Default Settings