User's Manual

ENGLISH
Miscellaneous Information
141141

You can record a TV program using your camcorder.

Television programs, movie video tapes, DVD titles, films and other program materials may be copyrighted. Unauthorized
recording of copyrighted materials may infringe on the rights of the Copyright owners and against copyright laws.

Insert a blank cassette for recording.

Connect your camcorder to a TV set using the Multi-AV cable before recording (refer to page 138).
1. Turn your camcorder on by setting the Power Switch to PLAY mode.
2. Turn your TV on and select the external input source that is connected to your camcorder.
3. Press the MENU button and select A/V, and select AV IN/OUT using the OK button.

The available options are listed: “OUT”, “AV IN”, “S-VIDEO IN”.
4. Select an option by pressing the DOWN or UP button then press the OK button.

The selected option is applied.
5. Press the MENU button to exit the menu screen.
6. Press the START/STOP button.

The Camcorder is set to PAUSE and AV-IN appears on the LCD monitor.
7. To start the recording, press the START/STOP button again.
8. To stop the recording, press the (STOP) button.

If the TV set has an S-VIDEO output terminal, you may use S-VIDEO for better quality.

The S-VIDEO terminal transmits video only. Connect AUDIO cables for sound.

If only mono audio output is available for the TV set, use the WHITE terminal.

Set AV IN/OUT to “OUT” after the recording is finished.
Recording TV Programs Using the Camcorder
PLAY MODE
INITIAL
CAMERA
A/V
VIEWER
WIND CUT
PB DSE
AV IN/OUT
OUT
REC MODE
PHOTO SEARCH
AUDIO MODE 12bit
AUDIO SELECT
A/V SET
PLAY MODE
AV IN/OUT
AV IN
S-VIDEO IN
OUT
Notes