User's Manual

ENGLISH
Miscellaneous Information
145145

To connect your Camcorder to a PC using DV cable
1. Turn your camcorder on by setting the Power Switch to PLAY
mode.
2. Connect the DV cable to your camcorder’s DV terminal which is
located on the bottom left side.

If your PC has a 4-pin DV port (most laptops with DV support
use 4-pin terminals), use a 4-pin to 4-pin DV cable.
3. Connect the other side of the DV cable to the DV port of the PC.

The DV IN indicator appears on the LCD monitor.

To Record Using a DV Connection
1. Run your Video Capturing Software and set the input source to your camcorder.

For further details on selecting the input source through the software, refer to the product’s documentation.
2. Press the (PLAY/STILL) button to start the transfer.

Recorded video is displayed on the PC screen.
3. Click on the REC button on the PC screen using the left button of the mouse.
4. To stop recording, click the

(STOP) button on the PC screen.

When using this camcorder as a recorder, the pictures that appear on the monitor may seem uneven, however recorded
pictures will not be affected.
Note