User's Manual

ENGLISH
Miscellaneous Information
148148

To Copy Still Images Using a USB Connection

The PC will recognize your camera as a removable mass storage device.

Use your Windows Explorer or other file browser to locate your stored images.

You can copy, delete or move your stored images from the memory card as a normal files found on your hard disk
drive(s).

To Use Your Camcorder as a PC Camera

You can use this camera as a PC camcorder for video chatting, video conference and other PC camera applications.

The screen size of the PC camera function is 160x120 pixels.

In PC camera mode, buttons on your camera do not function during the connection except the Power Switch, Mode Dial,
Zoom Lever and NITE PIX slide button to avoid errors.
1. Turn your camera on by setting the Power Switch to REC mode.
2. Establish the USB connection as above.
3. Run your PC camera application such as Microsoft Netmeeting.

To Disconnect USB Connection

After completing the data transfer, you must disconnect the cable in the following way:
1. Select the removable disk icon and click the right mouse button to select “Eject”.
2. Select “Confirm” and disconnect the USB cable when the splash pop-up screen disappears.

If you disconnect the USB cable from the PC or the camcorder during the data transfer, the data transfer will stop and the
data may be damaged.

If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it might cause conflict and
may not work properly. If this occurs, remove all other USB devices and try the connection again.

If your PC does not support USB 2.0 transmission, the connection will adapt to the USB 1.1 spec with a slower transfer rate.
Notes