User's Manual

ENGLISH
The Camcorder : Functions
4444

Display the DATE / TIME on the LCD monitor while recording or playing a video.
The DATE / TIME setting works in both REC and PLAY mode.

Set your Power Switch to REC or PLAY mode for DATE / TIME setup.
1. Press the MENU button.

The top menu including “VIEWER” is displayed.
2. Press DOWN button to select “VIEWER” then press the OK button.

The submenu including “DATE/TIME” is displayed.
3. Press DOWN button to select “DATE/TIME” then press the OK button.

The options available for DATE/TIME display are listed.
4. Select an option using the UP or DOWN button then press the OK button.

The selected option is applied.
5. Press the MENU button to exit the menu screen.

Date and Time information is automatically recorded on a special data area of the tape.

The DATE/TIME will read “- - -” under the following conditions:
During playback of a blank section of a tape.
If the tape was recorded before setting the clock in Camcorder mode.
When the lithium battery becomes weak or dead.

Before setting the DATE/TIME, be sure to set the CLOCK. Refer to Setting the Clock in page 38.
Setting the DATE / TIME Display
REC MODEREC MODE
REC MODEREC MODE
REC MODEREC MODE
Notes