User's Manual Part 2

ENGLISH

8080

USB interface

Connecting to a PC

1. Connect a USB cable to the USB port on the PC.

2. Connect the other end of the USB cable into the proper terminal on the

camcorder. (USB jack)

3. Connect the audio cable to the Line input jack of the PC.

If the PC has no Line input jack, connect the audio cable to the MIC input

jack. There is a possibility you’ll here some audio noise if you use the MIC

jack.

Notes

■

If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the

data may be corrupted.

■

If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB

devices, the camcorder may not work properly.

- If this occurs, remove all USB devices from the PC and reconnect the camcorder.

■

DV (IEEE1394) connection is encouraged with PC for transmission of more vivid image quality at the time of moving picture

transmission.

USB Cable

USB AUDIO Cable

00000? SCD903 USA (64~114) 4/14/04 12:38 PM Page 80