Dragon_eng_1~25 12/13/04 3:23 PM Page 101 ENGLISH Digital Video Camcorder SCD351/D352/D353/D354/D355 AF CCD LCD Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this Instruction Book thoroughly, and retain it for future reference.
Dragon_SEA_SAFETY 12/13/04 3:44 PM Page 100 ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert.
Dragon_SEA_SAFETY 12/13/04 3:44 PM Page 101 ENGLISH Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
Dragon_SEA_SAFETY 12/13/04 3:44 PM Page 102 ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
Dragon_SEA_SAFETY 12/13/04 3:44 PM Page 103 ENGLISH Notices and Safety Instructions 22. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23. If this power supply is used at 240V ac, a suitable plug adapter should be used.
Dragon_eng_1~25 12/13/04 3:23 PM Page 2 ENGLISH Contents Notes and Safety Instructions ....................................................................................................................................... 6 Getting to Know Your Camcorder ............................................................................................................................. 11 Features .................................................................................................................
Dragon_eng_1~25 12/13/04 3:23 PM Page 3 ENGLISH Contents Basic Recording ........................................................................................................................................................... 35 Using the Viewfinder ..................................................................................................................................................................................................................35 Adjusting the Focus......................
Dragon_eng_1~25 12/13/04 3:23 PM Page 4 ENGLISH Contents Appling Digital Effect ..................................................................................................................................................................................................................65 Selecting a Digital Effect ...........................................................................................................................................................................................
Dragon_eng_1~25 12/13/04 3:23 PM Page 5 ENGLISH Contents Selecting the Image Quality .......................................................................................................................................................................................................90 Number of Images on the Memory Card .............................................................................................................................................................................
Dragon_eng_1~25 12/13/04 3:23 PM Page 6 ENGLISH Notes and Safety Instructions Notes regarding the rotation of the LCD Screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1 1. LCD screen closed. 2. Standard recording using the LCD screen. ■ Open the LCD screen with your finger. 2 LCD open knob 3. Recording when looking at the LCD screen from the top. 4.
Dragon_eng_1~25 12/13/04 3:23 PM Page 7 ENGLISH Notes and Safety Instructions Notices regarding Copyright Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.
Dragon_eng_1~25 12/13/04 3:23 PM Page 8 ENGLISH Notes and Safety Instructions Notes regarding the Battery Pack ■ ■ ■ ■ ■ ■ Make sure that the Battery pack is fully charged before starting to record. To preserve battery power, keep your Camcorder turned off when you are not operating it.
Dragon_eng_1~25 12/13/04 3:23 PM Page 9 ENGLISH Notes and Safety Instructions Note regarding the Lens Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). Notes regarding electronic Viewfinder 1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight or near a window exposed to sunlight. 2.
Dragon_eng_1~25 12/13/04 3:23 PM Page 10 ENGLISH Notes and Safety Instructions Precaution regarding the Lithium Battery 1. The Lithium battery maintains the clock function and user settings; even if the Battery pack or AC adapter is removed. 2. The Lithium battery for the Camcorder lasts about 6 months under normal operation from time of installation. 3. When the Lithium battery becomes weak or dead, the date/time indicator will display --- when you set the Date/Time to on.
Dragon_eng_1~25 12/13/04 3:23 PM Page 11 ENGLISH Getting to Know Your Camcorder Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Multi OSD Language You can select the desired OSD language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch. Digital Data Transfer Function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™: i.
Dragon_eng_1~25 12/13/04 3:23 PM Page 12 ENGLISH Getting to Know Your Camcorder Accessories Supplied with Camcorder Make sure that the following basic accessories are supplied with your digital video camera. Basic Accessories 1. Lithium Ion Battery Pack 2. AC Power Adapter (AA-E8 TYPE) 3. AC Cord 4. Audio/Video Cable 5. Instruction Book 6. Lithium Battery for Remote Control (SCD354/D355 only) or Clock. (TYPE: CR2025) 7. Remote Control (SCD354/D355 only) 8. USB Cable (SCD352/D353/D354/D355 only) 9.
Dragon_eng_1~25 12/13/04 3:23 PM Page 13 ENGLISH Getting to Know Your Camcorder Front & Left View 6. EASY Q button 7. Function buttons 1. Lens REC SEARCH 2. LED light (SCD352/D354/D355 only) FADE BLC 8. TFT LCD screen 3. Remote sensor (SCD354/D355 only) 4. S-Video jack 5. Internal MIC 1. Lens 2. LED light (see page 48) (SCD352/D354/D355 only) 3. Remote sensor (SCD354/D355 only) 6. EASY Q button (see page 40) 8. TFT LCD screen 7. Function buttons PLAYER - CAMERA EASY M.
Dragon_eng_1~25 12/13/04 3:23 PM Page 14 ENGLISH Getting to Know Your Camcorder Left Side View 5. Focus adjustment knob 1. DISPLAY 6. Viewfinder 7. COLOR NITE SHUTTER 2. MACRO/PB ZOOM 3. Speaker 4. Mode switch (SCD353/D354/D355 only) (SCD351/D353 only) 7. COLOR NITE/ LED LIGHT (SCD352/D354/ D355 only) 1. DISPLAY (see page 23) 6. Viewfinder 2. MACRO/PB ZOOM (see page 44/see page 75) 3. Speaker 7. COLOR NITE SHUTTER (see page 47) (SCD351/D353 only) 4.
Dragon_eng_1~25 12/13/04 3:23 PM Page 15 ENGLISH Getting to Know Your Camcorder Right & Top View 1. NITE PIX switch (SCD352/D354/D355 only) 2. Menu selector (VOL/MF) 7. TAPE EJECT DV IEEE1394 DV 8. Zoom lever USB 3. MENU button AV 9. PHOTO button 10. Jacks USB USB MIC 11. Hook for hand strap 4. Start/Stop button AV AV 12. Jack cover 5. Power switch MIC External MIC 6. DC jack 1. NITE PIX switch (SCD352/D354/D355 only) 7. TAPE EJECT 2. Menu selector (VOL/MF) 9.
Dragon_eng_1~25 12/13/04 3:23 PM Page 16 ENGLISH Getting to Know Your Camcorder Rear & Bottom View 3. Memory card slot (SCD353/D354/D355 only) 4. Battery release 1. Lithium battery cover 2. Charging indicator 5. Tripod receptacle 1. Lithium battery cover 2. Charging indicator Memory Card slot (Usable Memory Card) SCD353 only 3. Memory card slot (SCD353/D354/D355 only) 4. Battery release 5.
Dragon_eng_1~25 12/13/04 3:23 PM Page 17 ENGLISH Getting to Know Your Camcorder Remote Control (SCD354/D355 only) 18. DISPLAY 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB 7. (FF) 8. (REW) 9. (PLAY) 17. Zoom 16. X2 15. DATE/TIME 14. (SLOW) 13. (STILL) 12. (STOP) 11. F. ADV 10. Direction 1. PHOTO (see page 68) 10. Direction ( 2. START/STOP 11. F. ADV (see page 74) 3. SELF TIMER (see page 43) 12. (STOP) 4. ZERO MEMORY (see page 42) 13. (STILL) 5.
Dragon_eng_1~25 12/13/04 3:23 PM Page 18 ENGLISH Preparation Adjusting the Hand Strap It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The Hand strap enables you to: - Hold the Camcorder in a stable, comfortable position. - Press the ZOOM and Start/Stop button without having to change the position of your hand. Hand Strap 1 1.
Dragon_eng_1~25 12/13/04 3:23 PM Page 19 ENGLISH Preparation Lithium Battery Installation Battery Installation for the Internal Clock ✤ The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack or AC Power adapter is removed. ✤ The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation.
Dragon_eng_1~25 12/13/04 3:23 PM Page 20 ENGLISH Preparation Connecting a Power Source There are two types of power source that can be connected to your Camcorder. - The AC Power adapter and AC Cord: used for indoor recording. - The Battery pack: used for outdoor recording. To use the AC Power Adapter and DC Cable 1. Connect the AC Power adapter to the AC Cord. 2. Connect the AC Cord to a wall socket. [ Notes ] ■ You must use the AC Power adapter of AA-E8 TYPE.
Dragon_eng_1~25 12/13/04 3:23 PM Page 21 ENGLISH Preparation Using the Lithium Ion Battery Pack ✤ The amount of continuous recording time available depends on - The type and capacity of the Battery pack you are using. - How often the zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the Battery pack to the Camcorder. 2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket. 3.
Dragon_eng_1~25 12/13/04 3:23 PM Page 22 ENGLISH Preparation Table of continuous Recording Time based on Model and Battery Type. ✤ ✤ If you close the LCD screen, it switches off and the Viewfinder switches on automatically. The continuous recording time given in the table below are approximations. Actual recording time depends on usage. Time Continuous recording time Charging time LCD ON VIEWFINDER ON SB-LSM80 Approx. 1hr 20min Approx. 1hr 20min Approx. 1hr 30min SB-LSM160 Approx.
Dragon_eng_1~25 12/13/04 3:23 PM Page 23 ENGLISH Preparation Battery Level Display The battery level display indicates the amount of power remaining in the Battery pack. a. b. c. d. e. Fully charged 20~40% used 40~80% used 80~95% used Completely used (flickers) (The Camcorder will turn off soon, change the battery as soon as possible) (Blinking) [ Notes ] ■ Please refer to the Table on page 22 for approximate continuous recording time.
Dragon_eng_1~25 12/13/04 3:23 PM Page 24 ENGLISH Preparation OSD (On Screen Display in Camera/Play Modes) 1. Battery level (see page 23) 2. Digital effects mode (see page 65) 3. DIS (see page 61) 4. Program AE (see page 63) 5. White balance mode (see page 59) 6. Shutter speed (see page 57) 7. Exposure (see page 57) 8. Manual focus (see page 58) 9. Date/Time (see page 33) 10. Zoom position (see page 44) 11. NITE PIX (see page 49) (SCD352/D354/D355 only) 12. Color nite (see page 48) 13.
Dragon_eng_1~25 12/13/04 3:23 PM Page 25 ENGLISH Preparation OSD (On Screen Display in M.Cam/M.Player Modes) (SCD353/D354/D355 only) 1. 2. 3. 4. 5. 6. 7. 8. 9. Photo quality Movie screen size CARD (Memory Card) indicator Image counter Current still image/Total number of recordable still images.
Dragon_eng_26~85 12/13/04 3:25 PM Page 26 ENGLISH System Menu Setting Selecting OSD Language ✤ ✤ Select the appropriate OSD Language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch. The Language function works in Camera/Player/M.Cam/M.Player modes. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/355 only) 3. Press the MENU button. ■ The menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 27 ENGLISH System Menu Setting Setting the Clock ✤ ✤ Clock setup works in Camera/Player/M.Cam/M.Player modes. The Date/Time is automatically recorded onto a tape. Before recording, please set the Date/Time. 1. Set the Power switch to CAMERA or PLAYER. 4 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Press the MENU button. ■ The menu list will appear.
Dragon_eng_26~85 12/13/04 3:25 PM Page 28 ENGLISH System Menu Setting Setting the Wireless Remote Control Acceptance (Remote) (SCD354/D355 only) ✤ ✤ The Remote function works in Camera/Player/M.Cam/M.Player modes. The Remote option allows you to enable or disable the remote control for use with the Camcorder. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Press the MENU button. ■ The menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 29 ENGLISH System Menu Setting Setting the Beep Sound ✤ ✤ The Beep Sound function works in Camera/Player/M.Cam/M.Player modes. You can turn on or off the Beep Sound for each press of a button for Camcorder use. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Press the MENU button. ■ The menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 30 ENGLISH System Menu Setting Setting the Shutter Sound (SCD353/D354/D355 only) ✤ ✤ The Shutter Sound function works in both Player and M.Cam modes. You can turn on or off the Shutter Sound for each press of the PHOTO button. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Press the MENU button. ■ The menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 31 ENGLISH System Menu Setting Viewing the Demonstration ✤ ✤ ✤ ✤ Before you begin : Make Sure that there is no tape inserted in the Camcorder. (see page 36) Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily. The Demonstration function may only be used in the camera mode without a tape inserted in the Camcorder.
Dragon_eng_26~85 12/13/04 3:25 PM Page 32 ENGLISH Display Menu Setting Adjusting the LCD screen ✤ ✤ ✤ Your Camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. This function works in Camera/Player/M.Cam/M.Player modes. Depending on the conditions under where you are using the Camcorder (indoors or outdoors for example), you can adjust; - LCD Bright - LCD Color 1 1.
Dragon_eng_26~85 12/13/04 3:25 PM Page 33 ENGLISH Display Menu Setting Displaying the Date/Time ✤ ✤ The Date/Time function works in Camera/Player/M.Cam/M.Play modes. The date and time are automatically recorded on a special data area of the tape. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Press the MENU button. ■ The menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 34 ENGLISH Display Menu Setting Setting the TV Display ✤ ✤ The TV Display function works in Camera/Player/M.Cam/M.Play modes. You can select the output path of the OSD (On Screen Display). - Off: The OSD appears in the LCD screen and Viewfinder only. - On: The OSD appears in the LCD screen, Viewfinder and TV. - Use the DISPLAY button located at the left side of the Camcorder to turn the OSD on/off displayed on the LCD screen /Viewfinder/TV. 1.
Dragon_eng_26~85 12/13/04 3:25 PM Page 35 ENGLISH Basic Recording Using the Viewfinder ✤ ✤ In the PLAYER mode, the Viewfinder will work when the LCD screen is closed. In the CAMERA mode, the Viewfinder will work when the LCD screen is closed or rotated counterclockwise 180°. Adjusting the Focus The focus adjustment knob of the Viewfinder enables individuals with vision problems to see clearer images. 1. Close the LCD screen and pull out the Viewfinder. 2.
Dragon_eng_26~85 12/13/04 3:25 PM Page 36 ENGLISH Basic Recording Inserting and Ejecting a Cassette ✤ ✤ When inserting a tape or closing a cassette holder, do not apply excessive force. This may cause a malfunction. Do not use any tape other than Mini DV cassettes. 1. Connect a power source and slide the TAPE EJECT switch. ■ The cassette door opens automatically. 2. Insert a tape into the cassette holder with the tape window facing outward and the protection tab toward the top.
Dragon_eng_26~85 12/13/04 3:25 PM Page 37 ENGLISH Basic Recording Hints for Stable Image Recording ✤ ✤ While recording, it is very important to hold the Camcorder correctly. Fix the lens cover firmly by clipping it to the hand strap. (see page 18) Recording with the LCD Screen 1. Hold the Camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD screen to support and adjust it. Do not touch the built-in microphone. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 38 ENGLISH Basic Recording Various Recording Techniques ✤ In some situations different recording techniques may be required for more dramatic results. 1. General recording. 1 2 3 4 2. Downward recording. Making a recording with a top view of the LCD screen. 3. Upward recording. Making a recording viewing the LCD screen from below. 4. Self recording. Making a recording viewing the LCD screen from the front. 5. Recording with the Viewfinder.
Dragon_eng_26~85 12/13/04 3:25 PM Page 39 ENGLISH Basic Recording Making your First Recording 1. Connect a power source to the Camcorder. (see page 20) (A Battery pack or a AC Power adapter) Insert a cassette. (see page 36) 1 2 4 3 2. Remove the Lens cover. √ √ 3. Set the Power switch to the CAMERA. ■ Open the LCD screen. ■ Set the Mode switch to the TAPE. Make sure that STBY is displayed.
Dragon_eng_26~85 12/13/04 3:25 PM Page 40 ENGLISH Basic Recording Using EASY Q Mode (for Beginners) ✤ ✤ The EASY Q mode works only in Camera mode. The EASY Q mode allows a beginner to easily make good recordings. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3.
Dragon_eng_26~85 12/13/04 3:25 PM Page 41 ENGLISH Basic Recording When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, press the Start/Stop button or set the Power switch to Off and then back to CAMERA. This auto power off feature is designed to save battery power. Record Search (REC SEARCH) ■ You can view a recording using the REC SEARCH +, - function in STBY mode.
Dragon_eng_26~85 12/13/04 3:25 PM Page 42 ENGLISH Basic Recording Setting the Zero Memory (SCD354/D355 only) ✤ ✤ The ZERO MEMORY function works in both Camera and Player modes. You can mark a point on a tape that you want to return to following playback. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3. Press the ZERO MEMORY button on the remote control before the recording or during playback at the point you wish to return.
Dragon_eng_26~85 12/13/04 3:25 PM Page 43 ENGLISH Basic Recording Self Record using the Remote Control (SCD354/D355 only) When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE or MEMORY CARD. 3. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen. 4. Press the Start/Stop button to start the timer.
Dragon_eng_26~85 12/13/04 3:25 PM Page 44 ENGLISH Basic Recording Zooming In and Out ✤ ✤ ✤ ✤ The Zoom function works in both Camera and M.Cam modes. Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the Zoom function too often. You can zoom using variable zoom speeds. Use these features for different shots.
Dragon_eng_26~85 12/13/04 3:25 PM Page 45 ENGLISH Basic Recording Using the Fade In and Out ✤ ✤ The FADE function works only in Camera mode. You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. To Start Recording 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3. Before recording, hold down the FADE button.
Dragon_eng_26~85 12/13/04 3:25 PM Page 46 ENGLISH Basic Recording Using Back Light Compensation Mode (BLC) ✤ ✤ BLC works in both Camera and M.Cam modes. Back lighting exists when the subject is darker than the background: - The subject is in front of a window. - The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to distinguish his/her features. - The subject is outdoors and the background is overcast.
Dragon_eng_26~85 12/13/04 3:25 PM Page 47 ENGLISH Basic Recording Using the Color Nite Shutter ✤ ✤ ✤ COLOR NITE SHUTTER function works only in Camera mode. Shutter speed can be controlled, allowing you to record slow moving objects. COLOR NITE SHUTTER function may product a brighter image. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3. Press the COLOR NITE SHUTTER button. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 48 ENGLISH Basic Recording Using the Color Nite Shutter with LED Light (SCD352/D354/D355 only) ✤ ✤ LED light enables you to record a subject in dark places without sacrificing color. The LED light can be used with COLOR NITE SHUTTER function only. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3. Press the COLOR NITE/LED LIGHT button until Color N. 1/15 ( ) appears on the display.
Dragon_eng_26~85 12/13/04 3:25 PM Page 49 ENGLISH Basic Recording Nite Pix (0 lux recording) (SCD352/D354/D355 only) ✤ ✤ The Nite Pix function works in both Camera and M.Cam modes. The Nite Pix function enables you to record a subject in darkness. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE or MEMORY CARD. (SCD353/D354/D355 only) 3. Slide the NITE PIX switch to ON. ■ Nite Pix indicator ( ) appears on the LCD screen.
Dragon_eng_26~85 12/13/04 3:25 PM Page 50 ENGLISH Basic Recording Power Nite Pix (SCD352/D354/D355 only) ✤ ✤ ✤ ✤ The Power Nite Pix function works only in Camera mode. The Power Nite Pix function can record a subject more brightly in darkness than the Nite Pix function. The Power Nite Pix is displayed for three seconds by LCD screen if you press the COLOR NITE SHUTTER button in state that a NITE PIX switch is turned ON.
Dragon_eng_26~85 12/13/04 3:25 PM Page 51 ENGLISH Advanced Recording Use of various Functions Setting menu items Main Menu Camera Tape Record Memory ! Sub Menu Functions Camera Available mode M.
Dragon_eng_26~85 12/13/04 3:25 PM Page 52 ENGLISH Advanced Recording Main Menu Display System Sub Menu LCD Bright Setting the Brightness tone of the LCD screen LCD Color Setting the Color tones of the LCD screen Date/Time Setting the Date and Time TV Display Selecting OSD on/off of TV Clock Set Setting the time Remote # Using the remote control Beep Sound Setting the Beep sound Shutter Sound ! Setting the Shutter sound USB Version $ Setting the USB Version USB Connect $ Setting the
Dragon_eng_26~85 12/13/04 3:25 PM Page 53 ENGLISH Advanced Recording Availability of functions in each mode Operating Mode Requested Mode Digital functions DIS O DIS Digital Zoom Digital Zoom O PHOTO (TAPE) O O SLOW SHUTTER * PHOTO ✕ ✕ Digital Effects O O O O NITE PIX (✩) O O O O ✕ Digital Effects NITE PIX O O O O ✕ O ✕ O : The requested mode will work in this operating mode. ✕ : You can not change the requested mode.
Dragon_eng_26~85 12/13/04 3:25 PM Page 54 ENGLISH Advanced Recording Selecting the Record Mode ✤ ✤ The Rec Mode function works in both Camera and Player(DV IN) modes. This Camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. - SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. - LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. 1. Set the Power switch to CAMERA or PLAYER. 4 2.
Dragon_eng_26~85 12/13/04 3:25 PM Page 55 ENGLISH Advanced Recording Selecting the Audio Mode ✤ ✤ The Audio Mode function works in both Camera and Player modes. This Camcorder records sound in two ways. (12bit, 16bit) - 12bit: You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the Main (Sound1) track. Additional stereo sound can be dubbed onto the Sub (Sound2) track. - 16bit: You can record one high quality stereo sound using the 16bit recording mode.
Dragon_eng_26~85 12/13/04 3:25 PM Page 56 ENGLISH Advanced Recording Cutting Off Wind Noise (Wind Cut) ✤ The Wind Cut function works in both Camera and Player (Audio dubbing) modes. Use the Wind Cut when recording in windy places such as the beach or near buildings. ✤ The Wind Cut function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the Power switch to CAMERA or PLAYER. 4 2.
Dragon_eng_26~85 12/13/04 3:25 PM Page 57 ENGLISH Advanced Recording Setting the Shutter Speed & Exposure ✤ ✤ ✤ You can set Shutter Speed only in Camera mode. The Exposure function works in both Camera and M.Cam modes. Shutter Speed and Exposure values can only be set in the Quick Menu. 3 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (SCD353/D354/D355 only) 3. Press the Menu selector. ■ Quick menu list will appear. 4.
Dragon_eng_26~85 12/13/04 3:25 PM Page 58 ENGLISH Advanced Recording Auto Focus/Manual Focus The Auto Focus/Manual Focus function works in both Camera and M.Cam mode. In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. Manual Focus can be set in the Quick Menu.
Dragon_eng_26~85 12/13/04 3:25 PM Page 59 ENGLISH Advanced Recording Setting the White Balance ✤ ✤ ✤ The White Balance function works in both Camera and M.Cam mode. The White Balance is a recording function that preserves the unique image color of the object in any recording condition. You may select the appropriate White Balance mode to obtain good quality color of the image. ■ Auto ( A ): This mode is generally used to control the White Balance automatically.
Dragon_eng_26~85 12/13/04 3:25 PM Page 60 ENGLISH Advanced Recording Using Quick Menu: White Balance ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the Menu button. 1. Press the Menu selector. 1 2. Move the Menu selector to the left or right to select White Balance, then press the Menu selector. 3.