User's Manual

Appendix
122
Vision
Writing voice memos to voice labels
You can use voice labels to distinguish objects of similar shape by attaching labels to them.
You can record and assign a voice memo to an NFC-enabled voice label. The voice memo is
played back when you place your device near the label.
Turn on the NFC feature before using this feature.
1
On the Apps screen, tap Settings

Accessibility

Vision

Voice label .
The voice recorder will start.
2
When you are finished recording, tap to stop.
3
Hold the back of your device over the voice label.
The information in the voice recording will be written to the voice label.
Using the page reader
Set the device to launch the page reader and to read the screen aloud.
1
On the Apps screen, tap Settings

Accessibility

Vision , and then tap the Page
reader
switch to activate it.
2
Tap and hold the screen with three fingers.
The page reader controller will appear.
3
Tap to start reading the screen.
To adjust the speed, tap
or .
DRAFT,
Set the device to launch the page reader and to read the screen aloud.
DRAFT,
Set the device to launch the page reader and to read the screen aloud.
Settings
DRAFT,
Settings

DRAFT,

Accessibility
DRAFT,
Accessibility
switch to activate it.
DRAFT,
switch to activate it.
Tap and hold the screen with three fingers.
DRAFT,
Tap and hold the screen with three fingers.
The page reader controller will appear.
DRAFT,
The page reader controller will appear.
Not
The information in the voice recording will be written to the voice label.
Not
The information in the voice recording will be written to the voice label.
Set the device to launch the page reader and to read the screen aloud.
Not
Set the device to launch the page reader and to read the screen aloud.
FINAL
The information in the voice recording will be written to the voice label.
FINAL
The information in the voice recording will be written to the voice label.