User's Manual

Basics
29
2
Select a device from the list and connect to it by following the on-screen instructions.
The next steps may vary depending on the connected device.
To allow nearby devices to search for your device and connect to it, tap
MORE
→
Set
device visibility
→
Device visibility , and then select an option.
Re-searching for devices
If the desired device does not appear in the list, search for the device.
Tap
REFRESH and select the device from the list of detected devices.
Deactivating the Quick connect feature
To deactivate the Quick connect feature, tap .
Sharing content
Share content with the connected devices.
1
Open the notification panel and tap Quick Connect .
2
Select a device from the list of detected devices.
3
Tap Send content and select a media category.
4
Follow the on-screen instructions to send content to the connected device.
The next steps may vary depending on the selected media category.
DRAFT,
and select a media category.
DRAFT,
and select a media category.
Follow the on-screen instructions to send content to the connected device.
DRAFT,
Follow the on-screen instructions to send content to the connected device.
DRAFT,
The next steps may vary depending on the selected media category.
DRAFT,
The next steps may vary depending on the selected media category.
Not
Quick Connect
Not
Quick Connect
Select a device from the list of detected devices.
Not
Select a device from the list of detected devices.
FINAL