User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsIntel Wi-Fi 6E AX211

Table Of Contents

빈 페이지

User Manual(Based on Intel guidance)

FCC ID : A3LAX211D730QED(Change in ID, Original/ID: PD9AX211D2)

Module specification

Supported Band list

• 802.11abgn+acR2+axR2 MIMO 2x2 – Supports Wi-Fi 6E and includes the new 6GHz band

• Bluetooth

5.2

Environment Specification

Item

Spec.

Storage Temperature

-40 ℃ ~ +70 ℃ (external direct temperture)

Operating Temperature

0 ℃ ~ 50 ℃

Pin assignment : M. module / CNVI interface

3-1. Figure of the pin arrangement

Pin#

Functionality

Arrow Marking

Drawing Figure

ANT1

: Aux

Wifi+Bluetooth

White(Blank)

D2W (1216)

ANT2

(ANT3)

: Main

Wifi Only

Black(Fill)

3-2. Pin Description

Summary of content (9 pages)

PAGE 1
User Manual(Based on Intel guidance) FCC ID : A3LAX211D730QED(Change in ID, Original/ID: PD9AX211D2) Module specification 1. Supported Band list • 802.11abgn+acR2+axR2 MIMO 2x2 – Supports Wi-Fi 6E and includes the new 6GHz band • Bluetooth® 5.2 2. Environment Specification Item Spec. Storage Temperature -40 ℃ ~ +70 ℃ (external direct temperture) 0 ℃ ~ 50 ℃ Operating Temperature 3. Pin assignment : M. module / CNVI interface 3-1.
PAGE 2
Pin No. Pin name In / Out Pin Voltage Description 1 UIM_POWER_ SRC/GPIO1 2 UIM_POWER_ SNK 3 UIM_SWP 4 3.3V 3.3V 5 3.3V 3.3V 6 GND 7 NFC_RESET# 8 ALERT# 9 I2C_CLK 10 I2C_DATA 11 COEX1 1.8V Coexistence with intel LTE 12 COEX2 1.8V Coexistence with intel LTE 13 COEX3 14 SYSCLK/GNSS0 15 TX_BLANKING/GNSS1 16 RESERVED/VDDIO18 17 GND 18 RESERVED/ISH2_UART_RXD 19 RESERVED/ISH2_UART_TXD 20 GND 21 ISH1_UART_CTS 1.8V ISH-UART 22 ISH1_UART_RTS 1.
PAGE 3
41 GND 42 CLink_CLK 43 CLink_DATA 44 CLink_RESET 45 SDIO_RESET# SDIO not support in AX210 46 SDIO_WAKE# SDIO not support in AX210 47 SDIO_DATA3/WIGIG_UART_RXD SDIO not support in AX210 48 SDIO_DATA2/WIGIG_UART_TXD SDIO not support in AX210 49 SDIO_DATA1/WIGIG_UART_RTS SDIO not support in AX210 50 SDIO_DATA0/WIGIG_UART_CTS SDIO not support in AX210 51 SDIO_CMD SDIO not support in AX210 52 SDIO_CLK SDIO not support in AX210 53 UART_WAKE# UART not support in AX210 54 LPSS_UA
PAGE 4
82 RESERVED 83 RESERVED 84 RESERVED 85 RESERVED 86 RESERVED 87 RESERVED 88 RESERVED 89 RESERVED 90 RESERVED 91 RESERVED 92 RESERVED 93 RESERVED 94 RESERVED 95 RESERVED 96 RESERVED A07~A50 NC G1~G4 GND GG1~72 GND + Thermal Pad Not used 4
PAGE 5
3-3.
PAGE 6
No 1 Item Supply Voltage VCC Pin NO Min Typ Max Unit 4, 5 ,72, 73 3.135 3.3 3.465 V Comments 3-4. Antenna port This is a description of the signal line of the antenna interface of this product. Pin number Name Functionality Chain A ANT 1 SISO1 Aux Wifi+Bluetooth Chain B ANT 2 SISO2 Main Wifi Only (ANT 3) 4. Safety precautions : This module should be used at authorized places or environments due to frequency jamming possibility while operating.
PAGE 7
1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system.
PAGE 8
allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules. 1) wireless adapters are intended for OEM integrators only. 2) wireless adapters cannot be co-located with any other transmitter unless approved by the FCC 12.
PAGE 9