User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsWi-Fi/BLE combo module

Table Of Contents

Version 1.0

Samsung Electronics

page 1 of 6

User manual of CCAR210R

1. Introduction

CCAR210R is a Wi-Fi/BLE combo module compliant with IEEE802.11 b.g.n MAC (2.4GHz) and

Bluetooth Low Energy (BLE5.0) optimized for low-power applications.

The core chipset is from Realtek, part number SDA8700CSM.

2. Hardware Architecture:

2.1 Main Chipset Information

Item

Vendor

Part Number

IEEE802.11 b.g.n(2.4GHz)

BLE5.0

Realtek SDA8700CSM

Summary of content (6 pages)

PAGE 1
User manual of CCAR210R 1. Introduction CCAR210R is a Wi-Fi/BLE combo module compliant with IEEE802.11 b.g.n MAC (2.4GHz) and Bluetooth Low Energy (BLE5.0) optimized for low-power applications. The core chipset is from Realtek, part number SDA8700CSM. 2. Hardware Architecture: 2.1 Main Chipset Information Item Vendor Part Number IEEE802.11 b.g.n(2.4GHz) Realtek SDA8700CSM BLE5.0 Version 1.
PAGE 2
3. Operational Description CCAR210R is the 802.11b/g/n MAC Wi-Fi and Bluetooth Low Energy BLE combo Module that acts as a communication controller for users of a wireless device to connect to SMART DEVICE - Features >IEEE 802.11 b/g/n (2.
PAGE 3
- Product Details - WIFI > Data Modulation DSSS:CCK,BPSK,QPSK for 802.11b OFDM:BPSK,QPSK,16QAM,64QAM,256QAM for 802.11g,n > Frequency Range 2400-2483.5MHz - BLE > Data Modulation GFSK > Frequency Range 2400-2483.5MHz - Operating Temperature > -20 ~ +85℃ Version 1.
PAGE 4
. RF Exposure Statement FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 5
. Notice FCC Statement Approval Statement CE Statement Hereby, we declare that this device is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. FCC approval This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation.
PAGE 6
IMPORTANT NOTE This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) This module may not be co-located with any other transmitters or antennas. 2) The antenna must be installed such that 20cm is maintained between the antenna and users.