User manual of CCBQ730M 1. Introduction CCBQ730M is a Wi-Fi module compliant with IEEE802.11 a.b.g.n.ac MAC/baseband/radio, Bluetooth 5.0 applications. The core chipset is from Mediatek, part number MT7668. 2. Hardware Architecture: 2.1 Main Chipset Information Item IEEE802.11 a.b.g.n.ac mac/baseband/radio Bluetooth 5.0(LE 4.2) Version 1.
3. Operational Description CCBQ730M is the 802.11a/b/g/n/ac WIFI Module that acts as a communication controller for users of a wireless device to connect to SMART DEVICE - Features > IEEE 802.11 a/b/g/n/ac > Dual-band 2T2R Mode(2.4GHz/5GHz) > 2X2 MIMO, 600MHz > Support 20MHz, 40MHz, 80MHz bandwidth in 2.4GHz band 5GHz band¦ > Security support for WFA WPA/WPA2 personal, WPS2.0, WAPIP > QoS support of WFA WMM, WMM PST > Integrated LNA, PA, and T/R switch > Optional external LNA and PA support. > Bluetooth 4.
- Product Details > Data Modulation DSSS: CCK, BPSK, QPSK for 802.11b OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM for 802.11a, g, n, ac GPSK, π/4-DQPSK, 8DPSK for Bluetooth > Frequency - 2400-2483.5 MHz - 5150-5350MHz, 5470-5725MHz, 5725-5850MHz This module ensures frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation Version 1.
. Notice FCC Statement Approval Statement FCC approval This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product.
IMPORTANT NOTE This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) This module may not be co-located with any other transmitters or antennas. 2) The antenna must be installed such that 20cm is maintained between the antenna and users.