User's Manual

Administrator’s Guide (Windows only)_ 92
17.
When installation is completed,
Results of remote installation
window
appears.
Check the result. For failed client computers, you can reinstall again by
clicking the
Reinstall
button.
For failed client computers, you can check the log file which is
created in the client computers.
Workgroup Remote Installation
You can also use remote installation method with workgroups.
If your company has no domain network environment, you should use
Workgroup Remote Installation
.
If the client computer uses Windows Vista or higher, ID should be
Administrator
.
1.
Make sure that the machine is connected to the network or USB and
powered on.
2.
Insert the supplied software CD into your CD-ROM drive.
• The software CD should automatically run and an installation window
appears.
• If the installation window does not appear, click
Start
and then
Run
.
Type X:\Setup.exe, replacing “X” with the letter which represents
your drive. Click OK.
• If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
• If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
3. Select Administrator Installation > Remote Installation.
If necessary, select a language from the drop-down list.
4. Read License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
5. Select Client Group window appears.
6. Click New Group.
To use remote installation, you need at least a group. If you have
already created a group, load the group you want and go to step 16.
• Edit Group: You can edit groups.
• Load Group: You can load groups.
• Delete Group: You can delete groups.
7. Log on window appears. Select Workgroup Remote Installation and
type in the Workgroup, ID and Password.
• For Windows XP/2000/2003, the ID should be of a memeber of
Administrators group for operating computers and for Windows
Vista/2008/7, the ID should be of the default administrator
account named Administrator.
• You can also use Domain Remote Installation (See "Domain
remote installation" on page 91).
8. Click Next.
9. Select Clients window appears.
10. Type in the group name in the Group Name field.
11. Add the client computers to be in the group to the right side panel.
• You can click … button to search the client computers and add
button to add the client computer by typing the IP address or
the computer name of client.
• You can add up to 50 client computers in a group. If you want
to add more than 50 client computers, you need to create more
groups.
• If the firewall is enabled on the client computer, access may be
denied.
• The client computer’s operating system should be Windows
2000 or higher.
• If you have grouped the client computers in a workgroup and
you try to connect to the client computer, a pop up window
asking you to enter an Administrator's ID/password of the client
computer you selected will appear if you can't access through
the password you set in step 7.
• C drive must be shared as C$.
12. Select Software and Utilities to Install
window appears.
Select the driver(s) and application software(s) you want to install and
click
Next
.
13. Select Printer connection
window appears.
Select the printer connection type and click
Next
.
• If you selected
Network Connection
,
Search Network Printers
window appears
, type in the IP address or host name in the
information field than click
Search
. when you are finished, click
Next.
• The discovered printer list will show network printers on the same
subnet. If you want to specify a network printer that is located over
subnet then specify IP address of network printer directly.
14. Confirm Group details window appears.
Check the group information and click Next.
Location to save the group shows the path of default folder
which stores the created group information. The group information
file will be created as “<group_name>.RGI. You can change the
path by clicking the Change button.
15. Select Client Group window appears again.
16. Select the group(s) and click Next to start remote installation.
Remote installation begins, you can see the installation status from the
window.
17. When installation is completed, Results of remote installation window
appears.
Check the result. For failed client computers, you can reinstall again by
clicking the Reinstall button.
For failed client computers, you can check the log file which is
created in the client computers.
Error log messages
MESSAGE MEANING
SUGGESTED
SOLUTIONS
Connection
Error
Unable to bind the socket.
[Port number:..]
Restart the client
computer.
Unable to listen the
socket. [Port number:..]
Unable to connect to the
client computer.
Client computer’s socket is
closed.