User's Manual

Network setup_ 30
4. Read License Agreement, and check I accept the terms of the
License Agreement. Then, click Next.
The program searches the machine.
If your machine is not found in the network or locally, the following
window will appear.
• Check if you want to install the software without
connecting the printer to the network or locally.
- Check this option to install the software without a machine
connected. In this case, the print a test page window will be
skipped.
• Sear
ch again
- Press this button to research connected machine.
- When you click this button, the firewall notice window
ap
pears;
Turn off the firewall and click Sear
ch again. For Windows
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option.
Then click Nex
t in the Firewall Notice window.
Turn off the firewall from the thi
rd party's program beside
the operating system. Refer to the manual provided by
individual programs.
• Direct
Input
- The Direct Inp
ut allows you to search a specific machine
on the network.
- Search by IP address: Enter the IP address or the host
name. Then click Next.
To verify your machine’s IP address, print a network
config
uration report (See "Printing a machine report" on
page 62).
- Search by network path: To find a shared machine (UNC
Path),
enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.
• Help
- If your machine is not connected to the computer or
netwo
rk, This help button gives detailed information about
the how to connect the machine.
• Set IP
Address
- If you want to set a specific IP address on a specific
netwo
rk machine, click the Set IP Address button. The Set
IP Address window appears. Do as follows:
a) Select a machine to be set with a specific IP address from
th
e list.
b) Configure an IP address, subnet mask, and gateway for the
machine manually and click Apply to set the specific IP
address for the network machine.
c) Click Next.
5. The
searched machines will be shown on the screen. Select the one you
wish to use and click Next.
If the driver searched only one machine, the confirmation window
appears.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and
skip to step 7.
7. If
the test page prints out correctly, click Yes.
If not, click No to r
eprint it.
8. T
o register as a user of the machine in order to receive information from
Samsung, click On-line Registration. You are now registered to the
Samsung web site.
9. Click Fi
nish.
• After the driver setup, you may enable firewall.
• If the printer driver does not work properly, follow the steps below
to repa
ir or reinstall the driver.
a) Make sure that the machine is connected to your machine and
powered on.
b) From the Start menu, select Programs or All Programs >
Samsung Printers > your printer driver name >
Maintenance.
c) Select the option as you wish, follow the instruction on the
window.
Macintosh
1. Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2. Inse
rt the supplied software CD into your CD-ROM drive.
3. D
ouble-click the CD-ROM icon that appears on your Macintosh desktop.
4. D
ouble-click the MAC_Installer folder.
5. D
ouble-click the Installer OS X icon.
6. En
ter the password and click OK.
7. T
he Samsung Installer window opens. Click Continue.
8. R
ead the license agreement and click Continue.