User's Manual

Basic setup_ 64
SETTING JOB TIMEOUT
You can set the time the machine waits before it restores the default copy
settings if you do not start copying after changing them on the control panel.
1. Press Menu on the control panel.
2. Press the left/right arrow until System Setup appears and press OK.
3. Press the left/right arrow until Machine Setup appears and press OK.
4. Press the left/right arrow until Timeout appears and press OK.
5. Press the left/right arrow until the time setting you want appears.
Selecting Off means that the machine dose not restore the default
settings until you press Black Start or Color Start to begin copying or
Stop/Clear to cancel.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.