User's Manual

1. Overview
This product is a module developed to process video signals in the 60GHz band using the built-in KSS104M
chip. Since multiple chips are used on one board, the spacing between chips and chips should be at least
15mm. In addition, the TX Chip of this product receives video signals from the outside and transmits them to
the Rx Chip of the KSS104M RX Board. In particular, by using an interface that transmits an electrical signal
called V-By-one, video transmission can proceed very quickly.
Features
 1 Rx chip and 3 Tx chips are mounted
 The data rate of 1 Rx chip supports up to 3Gbit/s general high speed.
 The data rate of 3 Tx chips supports up to 5.4Gbit/s general high speed.
 Very fast video transmission using V-by-One interface
 Typical Active Power Consumption
> 127mW Tx(Signal Processing ON)
> 77mW Tx(Signal Processing OFF)
> 152mW Rx(Signal Processing ON)
> 100mW Rx(Signal Processing OFF)
 Protection Against ESD Transient
> HBM : 1000V
> CDM : 500V/ 400V
> MM : 100V
Applications
 Ideal for applications requiring high-speed video processing