User Manual

CY-WDCB7UR user’s manual 6 of 27
1. Package Components
RF module with antenna Anti-shielding bag Driver CD
2. How to install the CY-WDCB7UR?
2.1 UWB RF module applications
This is the UWB module for OEM usage in the application of high speed data transmission. This module
follows standard Half miniCard mechanical dimension which is used in the commercial area. This module
is used primarily inside set-top box, wireless monitor or A/V receiver box for wireless connection of A/V
signal and data line as like USB signal.
2.2 Interface signals
This module is based on USB 2.0 interface. Pins of connector have USB and GPIO signals and power.
GPIO signals can be programmed for I2C signal line for device control. Power 3.3V is supplied to the
module. In the module, 1.2V, 2.4V DC are made for the circuit and 3.3V is used for I/O part. The power
consumption is about 1W.
2.3 Module Installation
The mother board which is installed with the UWB module should have a miniCard connector and latch
parts.