Printed in Korea E Type. 12/2014 A00429 Rev.1.
www.samsung.
Copyright © 2014 Samsung Electronics • Please read this manual before using the device to ensure safe and proper use. • Images may differ in appearance from the actual product. Content is subject to change without prior notice. Notices for using Bluetooth • Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide. • When the device is connected to another device via a wireless connection, place your device near to the connected device.
• Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your device. • Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files or illegally tapping communications for commercial purposes). Samsung is not responsible for the repercussion of illegal use of the Bluetooth feature.
Package contents Device, Pouch, USB cable, 3.5 mm audio cable, user manual The items supplied with the device and any available accessories may vary depending on the region or service provider. Charging the battery This device has a built-in battery. Before using the device for the first time or when the battery has been unused for extended periods, you must charge the battery. Use only Samsung-approved chargers and cables.
• To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Turning the device on or off Slide the Power switch up to turn on the device.
Registering the device and connecting via the Bluetooth feature Connecting via the NFC feature 1 Activate the NFC and Bluetooth features on the other device. 2 Turn on the headset and place the other device’s NFC antenna near the NFC antenna area ( ) of the headset. Device connection is complete after you allow the other device to connect to your headset. Connecting devices manually 1 Slide the Power switch to pairing mode and hold it for 3 seconds.
• Once devices are paired, recently connected devices automatically connect to your headset whenever you turn it on. • The NFC antenna area and the method for connecting via the Bluetooth feature may differ depending on the device. For more information, refer to the device’s user manual. Disconnecting from other devices Turn off the headset or deactivate the Bluetooth feature. Alternatively, place the connected device’s NFC antenna near the NFC antenna area ( ) of the headset.
• Use only one finger on the touch pad. It may not work if you use more than one finger. • The touch pad cannot be used while the headset is connected to another device via an audio cable. Function Method Adjusting the volume • Drag upwards or downwards. • Playing multimedia files Play or pause the file: Doubletap. • Play the next or previous file: Drag forwards or backwards. Using calling features • • Answer or end a call: Double-tap. • Tap and hold for more than 3 seconds.
Sharing music with other headsets Share music that you are listening to on your headset with other headsets of the same model. Ensure that the headset that you want to share music with is turned on. Method 1 Using the Power switch Slide the Power switch to pairing mode. Music that you are currently listening to on your headset is shared with other headsets of the same model. To listen to music playing on another headset, slide the Power switch to pairing mode twice.
Removing the battery (non-removable type) These instructions are only for your service provider or an authorised repair agent. Damage or faults caused by the unauthorised removal of the battery are not covered by the warranty. 1 2 Remove the headset’s left ear pad. 3 Cut the two wires as shown in the image below. 4 Remove the battery. 10 Loosen and remove the four screws and open the cover.
Safety information Follow the safety information to prevent injury to yourself or others and to prevent damage to your device. Do not touch the device with wet hands Do not drop or cause an impact to the charger or the device Keep your device dry Do not store your device in very hot or very cold areas.
Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
Correct disposal of batteries in this product (Applicable in countries with separate collection systems) This marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. The battery incorporated in this product is not user replaceable.
FCC ID: A3L-EOPN900 FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.
