User's Manual Part 2
Table Of Contents
- Chapter 3
- Chapter 4
- Wireless network
- Connecting to a WLAN and configuring network settings
- Using the NFC Feature (Tag & Go)
- Saving files to a smart phone automatically
- Sending photos or videos to a smart phone
- Sending photos or videos to multiple smart phones
- Using a smart phone as a remote shutter release
- Using the Baby Monitor
- Using Auto Backup to send photos or videos
- Sending photos or videos via email
- Using photo or video sharing services
- Using Samsung Link to send files
- Wireless network
- Chapter 5
- Chapter 6
- Chapter 7
135
Wireless network > Using Auto Backup to send photos or videos
4
Select OK.
To cancel sending, select Cancel.
You cannot select individual les to backup. This function backs up
only new les on the camera.
The backup's progress will be shown on the PC monitor.
When the transfer is completed, the camera will turn o
automatically in approximately 30 seconds. Select Cancel to return
to the previous screen and prevent the camera from turning o
automatically.
To turn o your PC automatically after the transfer is complete,
select Shut down PC after backup.
To change the backup PC, select Change PC.
When you connect the camera to the WLAN, select the AP that is connected
to the PC.
The camera will search for available access points even if you are connecting
to the same access point again.
If you turn o the camera or remove the battery while sending les, the le
transfer will be interrupted.
While you are using this feature, the shutter control is disabled on your
camera.
You can connect only one camera to the PC at a time for sending les.
The backup may be canceled due to network conditions.
When there are no les in the camera memory, you cannot use this feature.
You must turn o Windows Firewall and any other rewalls before using this
feature.
You can send up to 1,000 recent les.
On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.