ADT Home Security Starter Kit Setup Guide E RT HER STA
Welcome to your ADT Home Security Starter Kit We're here to help you protect your home and your family, so let's get started with a few simple steps. A Setup your ADT Security Hub B Setup your ADT Door and Window Detectors C Setup your ADT Motion Detector D Complete a Walk Test E Activate optional ADT professional monitoring services F Learn more about Works with SmartThings If you have any difficulties setting up your ADT Home Security Starter Kit, please visit SmartThings.
A 1. Setup your ADT Security Hub ADT Security Hub Place the ADT Security Hub in an area of your home that has good Wi-Fi and cellular coverage. Avoid placing it in direct sunlight, near heat sources, where it can be easily viewed from doors or windows, or where it can be reached by small children. 3. Connect the ADT Security Hub to a power outlet. Make sure the outlet is not controlled by a switch that could accidentally cut the power. Power Receptacle 2.
ADT Security Hub 5. 6. Download the SmartThings app for Android or iOS, create an account for your home, and then follow the on-screen instructions to complete setup. • An Activation Code will be displayed on the ADT Security Hub. Enter this code into the SmartThings app when prompted. • If you already have a SmartThings Hub (or compatible device with SmartThings Hub functionality), visit SmartThings.com/Support-ADT to learn more about replacing it with the ADT Security Hub. ADT Security Hub 7.
ADT Security Hub • ADT Security Hub Spread the edges of the bracket apart and insert the power plug into the power outlet. Thread the zip ties through the slots and fasten them to secure the power plug. Zip Tie Slots Note: You can also mount the ADT Security Hub on a wall. Visit SmartThings.com/Support-ADT for more information.
B 1. Setup your ADT Door and Window Detectors Use the ADT Door and Window Detectors to protect doors and windows where an intruder might be able to enter your home. • 2. 4. Remove the tab on the detector marked “Pull This Tab”. There are two ADT Door and Window Detectors in the ADT Home Security Starter Kit and each one consists of two parts. Setup the detectors one at a time and do not remove the tabs marked “Pull This Tab” until instructed below.
ADT Door and Window Detectorss 5. ADT Door and Window Detectors Use the SmartThings app to scan the QR code on the back of the detector and then follow the on-screen instructions to complete setup. • Remove the QR code from the back of the detector and attach it inside the ADT Security Hub User Guide for future reference. 6. Place both parts of the detector on your door or window as shown in the illustrations.
ADT Door and Window Detectorss ADT Door and Window Detectors Placement on windows: • Single-Hung Windows Make sure that the alignment marks on both parts of the detector are aligned and facing each other, and that both parts of the detector are less than 0.5 inches apart when the door or window is closed Double-Hung Windows Alignment Marks Detector Magnet Detector On Window Sill • Make sure the detector is placed at the top of door or window frames to avoid accidental damage to the detector.
ADT Door and Window Detectorss 7. 8. ADT Door and Window Detectors Use the pre-applied adhesive tape to attach both parts of the detector to your door or window. • Make sure that all surfaces are clean and dry. • Make sure to place both parts of the detector correctly as the adhesive tape will be difficult to remove.
C 1. Setup your ADT Motion Detector ADT Motion Detector Use the ADT Motion Detector in a high-traffic area where an intruder would be likely to pass within a 30-foot range, e.g. living room or hallway. 3. Use the SmartThings app on your smartphone to select the “My Home” tab. Select "Things", and then “Add a Thing". 4. Remove the tab on the detector marked “Pull This Tab”. 30 Feet Range 60o Coverage In Both Directions 0o 60o 2.
ADT Motion Detector 5. ADT Motion Detector Use the SmartThings app to scan the QR code on the front of the detector and then follow the on-screen instructions to complete setup. • Remove the QR code from the front of the detector and attach it inside the ADT Security Hub User Guide for future reference. 6. Pick a location 6.5 to 7.5 feet above the floor and mount the detector on a flat wall or in a corner.
ADT Motion Detector • Make sure that there are no objects blocking the detector's view and that it's in a stable location. • Make sure that the detector is not aimed at stairs, furniture, or other surfaces where a pet might climb, or used in a room where large pets (over 55 lbs) may be present and could cause false alarms. • Make sure that the detector is not placed near a source of heat that could cause false alarms, e.g. a heating vent or fireplace.
D Complete a Walk Test Once you’ve finished setting up your ADT Security Hub and detectors, you should perform a Walk Test to ensure that all your devices are installed and working correctly. 1. Select System Settings from the Home screen on your ADT Security Hub. 2. Enter the Master User Code. 3. Select Walk Test. 4. Select Sensors Test and follow the on-screen instructions. • If a detector fails the Sensors Test, check that it’s been installed correctly or visit SmartThings.
F Learn more about Works with SmartThings Your ADT Security Hub works as a SmartThings Hub, allowing it to connect wirelessly with a wide range of smart devices and make them work together. Look for the Works with SmartThings label next time you’re buying a connected device for your home, or visit SmartThings.com/ADT to see the full list of compatible devices. Congratulations! Your ADT Home Security Starter Kit is now setup and ready to use.
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document is subject to change without notice. Copyright 2017 SmartThings, Inc. All rights reserved. ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly prohibited. Revised 06/17. P/N 10016840.
