Use Instructions

SAIT‐IFU‐GEMS‐HRev.1.1(2019‐11) Page30of79
Chapter6.Operatingthedevice
6.1.Turnonthedevice
Turnonthepowerswitchbypushingitup.Theindicatorlight(PowerLED)willturngreen.Thencheckthatthefront
left and right LEDs (Control LED) are ON, which indicates that the device is booting up. This may take up to 15
seconds.Whendeviceisreadyforoperation,onlytheorangelightison.

SequenceofLED(controlLEDandpowerLED)Lighting



Situation LEDstate Example
1)Poweroff Bothlightoff ControlLED

2)Poweron Powerlighton PowerLED

3)Poweronbootingup Greenandorangelighton ControlLED

4)Deviceonandreadyfor
operation
Orangelightonlyon ControlLED


