User's Manual

Assembling
16
› Charge with the PC data cable
Before charging, ensure that your PC is turned
on.
Open the cover to the multifunction jack on
1
the top of the phone.
Plug one end (mini-USB) of the PC data cable
2
into the multifunction jack.
Connect the other end of the PC data cable
3
into the USB port on a PC.
Depending on the type of PC data cable
you are using, it may take some time before
charging begins.
When the battery is fully charged (the
4
battery icon is no longer moving), unplug
the PC data cable from the phone and then
from the PC.
When the battery is fully charged (the
4
battery icon is no longer moving), unplug
the travel adapter from the phone and then
from the power outlet.
Do not remove the battery before removing
the travel adapter. Doing this may cause
damage to the phone.
When you charge the battery for the rst
time, charging your battery completely may
take about X hours. Because the battery is a
consumable part, the battery will gradually wear
out and the charging time will be reduced. The
initial charging capacity of your battery is about
XXXX mAh.