460/465 LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HC460-465-EU]Install-Guide-X0ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB.
Contents yy Operational Modes....................................................................................................................................... 2 yy Still image warning........................................................................................................................................ 2 yy Securing the Installation Space..................................................................................................................... 2 ENGLISH yy Instruction......
Accessories ✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎ The items’ colours and shapes may vary depending on the model. • Remote Control & Batteries (AAA x 2) • Power Cord • Safety Guide (Not available in some locations) • • • • Quick Setup Guide Guide Stand Screws Stand ✎✎ The stand and stand screws may not be included depending on the model. ✎✎ The Data Cable may not be included depending on the SI Vendor.
HG**EC670,HG**AC670,HG**EC675 1 2 C x4 (M4 X L14) B A Front ATTENTION Top View DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL ✎✎Place a soft cloth over a table to protect the TV, and then place the TV on the cloth screen side down. ✎✎Insert the Stand Guide into the slot on the bottom of the TV.
Viewing the Connection Panel - SIDE - 7 6 VIDEO AV IN (5V 0.5A) / CLONING 1 AUDIO 5 RJP HDMI IN (DVI) HG**AC46* 4 ANT IN PC / DVI AUDIO IN PC IN 2 - SIDE - 7 6 Ꮋ ䷈书 ৈ (5V 0.5A) / CLONING AV 䕨ܺ 㾛书 1 3 5 RJP HDMI 䕨ܺ (DVI) HG**AC46* 4 ANT 䕨ܺ PC / DVI ䷈书䕨ܺ PC 䕨ܺ 2 6 3 English [HC460-465-EU]Install-Guide-X0ENG.
6 USB VIDEO AUDIO 5 AV IN (5V 0.5A) /CLONING 1 7 RJP HG**EC460 HDMI IN (DVI) COMMON INTERFACE 4 8 ANT IN PC / DVI AUDIO IN 2 PC IN 3 ✎✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎✎ When connecting an external device, match the colour of the connection terminal to the cable. 1 USB (5V 0.5A) / CLONING –– Connector for software upgrades and Media Play, etc. –– Service connection.
Display Modes You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card.
✎✎ Optimal resolution is 1920 X 1080 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.
Using the TV's Controller The TV Controller, which is a small joystick like button at the right back of the TV, lets you control the TV without the remote control. Selecting Media Play Selecting a Source Selecting the Menu Function menu Remote control sensor Power off TV Controller The image is drawn by facing the front side of the TV. ✎✎ Some functions which require a PIN code may not be available. ✎✎ The product colour and shape may vary depending on the model.
Viewing the Remote Control ✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Display and select available video sources. Turns the TV on and off. Have direct access to channels Alternately selects Teletext, Double or Mix. GUIDE GUIDE TTX/MIX Electronic Programme Guide (EPG) display. Cut off the sound temporarily. Adjust the volume. Change channels. CH LIST Display channel list on the screen. Swich to the HOME Screen.
Using the Football Mode Football Mode t ✎✎ MENU m → Applications → Football Mode → ENTER E This mode provides optimized condition for watching sports games. • a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to resume. ✎✎ When the Football Mode is on, the picture and sound modes are set to Stadium automatically. ✎✎ If you turn the TV off while watching Football Mode, the Football Mode will be disable.
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear HDMI USB RS/232 TV Rear Panel AUDIO AV IN VIDEO RJP HDMI IN (DVI) 2 HDMI cable ANT IN PC / DVI AUDIO IN PC IN 1 RS-232 Data Cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
Connecting the RJP (Remote Jack Pack) Output to any external source connected to RJP on the hotel desk. 3 Video Cable RJP Rear USB HDMI VIDEO AUDIO AUDIO/PC RS/232 TV Rear Panel AUDIO 4 HDMI cable AV IN VIDEO RJP HDMI IN (DVI) 2 Audio Cable ANT IN 5 PC / DVI AUDIO IN PC IN 1 D-sub / PC Audio cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP. 3.
• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. • The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again.
No 4 5 Hotel TV Function Category Item initial value Channel Rescan Message ON When there is a mismatch between the data in the channel map and the transmitted data , the TV autotunes the channels to restore the data/parameters in the channel map. • On: When Channel Rescan Message is ON, The OSD showing that the channels are being rescanned will be displayed to Hotel Guests.
No 9 10 Hotel TV Function Category External Source Eco Solution Item initial value USB Pop-up Screen Default Logo/ Message External Source Banner ON Auto source OFF • On : When an external input source is connected to the TV, the TV identifies the input source, and then automatically switches to that input source. • Off : Auto Source function is Off. Anynet+Return Source Power On Src Select the return TV source after stopping an Anynet+(HDMI-CEC) connection.
No 15 16 Hotel TV Function Category Security System Item initial value Description Password Input … Input Password 00000000. Password Setting … Set new Password. Password Reset … Reset Password to 00000000. Security Mode … Security Mode ON or OFF. USB … USB Disable or Enable. HDMI … HDMI Disable or Enable. TTX Security … TTX function Enable or disabl Self Diagnosis for TV … Enter Self Diagnosis Menu. • Picture Test: Use to check for picture problems.
¦¦ Welcome Message The Welcome message is a feature that allows you to display customized message on the TV every time the TV is turned on by a guest in a hotel room. –– The Welcome message settings are placed in the Hotel Option Menu. –– The Welcome message should be ON in order for the message to be displayed when the power is turned on.
