User's Manual

14
English
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
PC / DVI
AUDIO IN
ANT IN
P
C
/
DV
I
A
U
DI
O
I
N
ANT
IN
RJP
HDMI IN
(DVI)
USB HDMI VIDEO
AUDIO AUDIO/PC
RS/232
AV IN
AUDIO
VIDEO
PC IN
TV Rear Panel
RJP Rear
5
1
D-sub / PC Audio cable
2 Audio Cable
3 Video Cable
4 HDMI cable
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-
7660 (HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different
Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are
connected from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function
allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending mes-
sages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set
by the User.
✎ You can select HDMI IN and AV IN for connecting the RJP.
✎ When the TV is on, connect the TV and the RJP within 10 seconds.
[HC460-465-EU]Install-Guide-X0ENG.indd 14 2014-05-21  3:08:24