User's Manual

23
English
¦ Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and
Picture mode Setup when the TV starts for the first time.
– Hotel Plug & Play is only available when the power is turned ON for the first time.
– After setting up the TV first and running Clone TV to USB.
– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
When pressing OK button, the
hotel menu appears as shown on
the left. Complete the hotel menu
settings, and then reset the TV.
You can use your TV.
To receive channels, configure the options below
then select Scan.
Auto Tuning
Aerial Air
Channel Type Digital & Analogue
Scan
Select the connected aerial
that you want to use to get
channels.
Clock
Clock Mode
Date
Time
Time Zone
DST
Auto
--/--/----
--:--
Auto
Off
--:--
You can adjust your time to set DST, Time Zone and
clock mode
Set current date and time
Select your information in the categories below.
Configure your TV
Country
Picture Mode
Bulgaria
Standard
Select the country that
you're in now
Easy Set up
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this,Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
Setup.
c
Next
Hospitality Mode Standalone
SI Vendor
OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
System
MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu
When complete, power down TV.
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change Skip
Select your language to start the on screen setup.
English
Eesti
Suomi
Français
Deutsch
Select your Language
Press the ▲▼◄►
buttons to move the
highlight.
Press the enter button to
select.
The Language Setting will be applied to Main Menu and not Plug and Play.
Standalone mode is set
TV will enter the RF mode
If Standalone
Setup is selected
<Depending on Region, this step
may not exist.> After selecting
the country in the country menu,
some models may proceed with an
additional option to setup the pin
number.
If you forget the PIN code, in the
Hotel menu, select the SERVICE
→ TV Reset. And set the pin code
again in the Plug & Play.
If Standalone
Only is selected
If Skip is selected
* It may differ depending
on the model.
* It may differ
depending on
the model.
TV Setup Complete!
Your TV is now ready to use.
Ok
Auto Tuning
Stop
Digital
TV
Radio
Data/Other
Analogue
0
0
0
0
0
Auto tuning is finding channels for you...
C40 625MHz
2%
Auto Tuning Complete.
Auto Tuning
Digital
TV
Radio
Data/Other
Analogue
0
0
0
0
Change Settings
Scan Again
0
[HC460-465-EU]Install-Guide-X0ENG.indd 23 2014-05-21  3:08:27