User's Manual

English

1. LocalSet

– Check the Current Localset.

– If you want to change the localset, select the Change.

– If you select the Skip, the Start screen appears.

2. Start - Easy Set Up

– If you select the Standalone Only, the Standalone hotel mode is set by default.

– When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the

Interactive menu.

– Select the Standalone Plug & Play to go next step.

3. Select the Language

– Select the OSD (On Screen Display) language.

– Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models.

4. Select the Country and Picture Mode

– Select the appropriate country and picture mode.

– Depending on model and region, some country may not exist.

5. Auto Tuning

– Select the antenna source and channel type. Conﬁgure the settings and select the Scan.

– The Auto Tuning operation starts searching for channels

– When the Auto Tuning operation is completed, the channel information is displayed.

6. Clock

– Set the right time by setting the DST (Daylight Savings Time) and Time Zone.

7. TV Setup Complete

[HC460-465-EU]Install-Guide-X0ENG.indd 25 2014-05-21  3:08:28