User's Manual

Changing the Channel of the Sub Picture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
63
Selecting a Signal Source for the Sub Picture
If the source of the sub picture is “TV” during PIP on, you can select a signal source of the sub
picture separately from the main picture. (If the main picture is “ANT 2 IN” and the signal sources
are different, making adjustments is necessary.)
62
Special Features
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
3
Press the … or † button to
select “Air/CATV”, then
press the ENTER button.
Press the … or † button to
select “Air”, “STD”, “HRC”
or “IRC”, then press the
ENTER button.
Press the EXIT button to exit.
Picture
Mode : Dynamic √
Custom √
Color Tone : Normal √
Size √
Digital NR : On √
DNIe : On √
MCC √
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Picture
▲ More
Film Mode : Off √
PIP √
Move Enter Return
Input
Picture
Sound
Channel
Setup
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
3
Press the … or † button to
select “Channel”, then press
the ENTER button.
Press the … or † button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the CH or CH button on the remote control to change
channels of sub picture during PIP on.
Picture
Mode : Dynamic √
Custom √
Color Tone : Normal √
Size √
Digital NR : On √
DNIe : On √
MCC √
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Picture
▲ More
Film Mode : Off √
PIP √
Move Enter Return
Input
Picture
Sound
Channel
Setup
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Air
Channel : Air 11
Select Sound : Main
Move Enter Return
Input
Picture
Sound
Channel
Setup
Air
STD
HRC
IRC
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Air
Channel : Air 11
Select Sound : Main
Move Enter Return
Input
Picture
Sound
Channel
Setup
▲
▼
Air 11
NOTE
• The channels of sub picture are not available when antenna is set to “ANT 2 IN”. It links to
“ANT 1 IN”.