User's Manual

Wiring the Mains Power Supply Plug(UK Only)
Russia Only - PCT Notice
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to
BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse coverx
is required, it must be of the same colour as the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to
reach a power point, you should obtain a suitable safety approved extension lead or consult your
dealer for assistance. However, if there is no alternative to cut off the plug, remove the fuse and then
safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock ha
ard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields.
MPR II Compliance (MPR II applied model only)
- 14 -
• EPA applied model only
As an ENERGY STAR Partner, Samsung has determined that this product
or product models meets the ENERGY STAR guidelines for energy efficiency.
safety 2003.12.3 4:51 AM 페이지15