Bluetooth HEADSET HM6400
Contents Getting started Safety precautions Charging the headset Wearing the headset Using your headset Turning the headset on or off Pairing and connecting the headset Using call functions Appendix Frequently asked questions Certification and Safety approvals UL certified travel adapter Warranty and parts replacement Specifications
Take the time to read through this user manual before using WEPXXX Bluetooth Headset. ® Bluetooth is a registered trademark of the Bluetooth SIG, Inc. worldwide— Bluetooth QD ID: B0XXXXX More information about Bluetooth is available at www.bluetooth.com. Safety precautions Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. Bring the headset to an authorized service center to repair it or replace the battery.
Charging the headset This headset has a rechargeable internal battery which is non-removable. Ensure that you fully charge the battery before using the headset for the first time. 1 Plug the small end of the travel adapter into the charger jack. 2 Plug the large end of the travel adapter into a power outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the indicator light changes to blue.
Checking the battery level At the same time, press and hold the Volume down button and the Talk button. Depending on the battery level, the indicator light flashes 5 times in one of the following colors: Battery level Indicator light color Above 80% Blue 80 ~20% Violet Below 20% Red When the battery power is low The headset beeps and the indicator light flashes red. Recharge the battery. If the headset powers off during a call, the call will be automatically transferred to the phone.
Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. Activated functions and features may differ depending on the types of your phone. Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your headset. Turning the headset on or off Slide the power switch to turn the headset on. The blue indicator light flashes 4 times. Slide the power switch to turn the headset off.
close together. After pairing, you can connect the two devices. Pairing and connecting the headset with a phone 1 Enter Pairing mode. With the headset turned on, press and hold the Talk button until the indicator light turns blue and stays lit after blinking. When you turn on the headset for the first time, it automatically enters Pairing mode. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual).
Disconnecting the headset To disconnect the headset from your phone, Turn off the headset. Use the Bluetooth menu on your phone. Reconnecting the headset When the headset is paired with a phone, it will attempt to automatically reconnect each time you turn it on. If the headset does not automatically attempt to reconnect, Press the Talk button. Use the Bluetooth menu on your phone.
Answering a call When you hear incoming call tones, press the Talk button to answer a call. Ending a call Press the Talk button to end a call. Rejecting a call When a call comes in, press and hold the Talk button to reject a call. Using options during a call You can use the following functions to control your call: Muting the microphone Press and hold the Volume up or down button to turn the microphone off so that the person with whom you are speaking cannot hear you.
answer a second call. When you hear waiting tones, press and hold the Talk button to place the first call on hold and answer a second call. To switch between the current call and a held call, press and hold the Talk button. Appendix Frequently asked questions Will my headset work with laptops, PCs, and PDAs? Your headset will work with Bluetooth devices that support same headset’s Bluetooth profiles.
radio, or computer? interference with standard, consumer-grade electronic equipment. Can other Bluetooth phone users hear my conversation? When you pair your headset to your Bluetooth phone, you are creating a private link between only these two Bluetooth devices. The wireless Bluetooth technology used in your headset is not easily monitored by third parties because Bluetooth wireless signals are significantly lower in radio frequency power than those produced by a typical mobile phone.
Certification and Safety approvals FCC FCC ID: A3LHM6400 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. UL certified travel adapter The travel adapter for this headset has met applicable UL safety requirements. Please adhere to the following safety instructions per UL guidelines.
Warranty and parts replacement Samsung warrants this product as free of defects in material, design and workmanship for the period of one year from the original date of purchase. (Depending on your country, the length of warranty may vary.) If during the period of warranty this product proves defective under normal use and service you should return the product to the retailer from whom it was originally purchased or qualified service center.
Some of the contents in this manual may differ from your phone depending on the software of the phone or your service provider. World Wide Web http://www.samsungmobile.com Printed in Korea Code No.:GH68-XXXXXA English. 11/2009. Draft.
