User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsWLAN Transmitter Module

Wireless Dock Cradle for iPod/iPhone

Model : HT-WDC10

Thank you for purchasing this product (HT-WDC10).

First, please update the main unit(HW-C450/C451) with connecting supplied USB to USB

PORT back the main unit. When the main unit power is on. The power of the main unit is

turned off automatically after the messages are displayed as a following order.

"UPDATE"

➝

"M 0% ~ 100%"

➝

"W 0% ~ 100%"

➝

"OK".

Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter.

Then Press O/A INPUT button on the remote control to select "iPod" mode.

The INPUT mode of the main unit will switches as follows.

repeatedly press DIGI.1

➝

DIGI.2

➝

ANALOG

➝

iPod

✴

If the iPod/iPhone does not automatically make

wireless connection to the Hone Theater, ID setting

must be made manually.

1. Turn off your Home Theater(HW-C450).

2. Press the hold "AV SYNC" button on the remote

control for 5 seconds. The standby light on the

HW-C450 will blink once.

3. Connect the iPod/iPhone to the Wireless transmitter.

4. Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter

for 5 seconds. The link light on the wireless transmitter will blink fast.

Turn on your Home Theater(make sure the wireless transmitter's Link LED in ON). To listen to music

from your iPod/iPhone over the Home Theater, select the iPod mode as the Home Theater's source.

✴

When iPod is connected to WDC10, both the Home Theater and the iPod Volume are operated together.

Display

Function

LINK (Blue LED) STANDBY (Red LED)

LED ON

Pairing successfully completed STANDBY

LED BLINK (Long blink) Processing iPod/iPhone LOW BATTERY

LED BLINK (Short blink) Processing pairing Pairing failed

OPERATION STATUS OF THE WIRELESS TRANSMITTER'S LED

If you use the main unit nearby a wireless device such as a laptop computer, an AP,

or Wiﬁ , any unstable operation error can happen.

▪

STANDBY

LINK

CHARGE

Summary of content (6 pages)

PAGE 1
Wireless Dock Cradle for iPod/iPhone Model : HT-WDC10 Thank you for purchasing this product (HT-WDC10). First, please update the main unit(HW-C450/C451) with connecting supplied USB to USB PORT back the main unit. When the main unit power is on. The power of the main unit is turned off automatically after the messages are displayed as a following order. "UPDATE" ➝ "M 0% ~ 100%" ➝ "W 0% ~ 100%" ➝ "OK". Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter.
PAGE 2
Wireless Dock Cradle for iPod/iPhone How to charge the Wireless Transmitter 1. Connect the Wireless Transmitter to the Charging Cradle. 2. Connect the DC power adaptor to a wall socket. • The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns Green. LIN K STA ND ✴ The Wireless Transmitter can be only charghed by the supplied adaptor.
PAGE 3
LIN K STANDBY Wireless Dock Cradle for iPod/iPhone Accessories CH AR GE CH AR GE CH AR GE Charging Cradle LI USB (only for update HW-C450/C451) N K STAN DB Y CH AR GE LIN K STA ND BY Wireless Transmitter DC power code LI N K DC power adaptor STAN DB Y ▪ This USB memory use only for HW-C450/C451 firmware update. Samsung is not responsible for problems occurring due to using for other purposes. Be careful to keep the USB out of the reach of children, who might swallow it.
PAGE 4
Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle is a warning sign alerting you of dangerous voltage Inside the product CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QULAIFIED SERVICE PERSONNEL.
PAGE 5
Safety Warnings FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. RF Radiation Exposure Statement This equipment complies with FCC and IC RF Radiation Exposure limits set forth for an uncontrolled environment.
PAGE 6
Safety precautions The following diagrams illustrate the precautions to be taken when using or moving your Wireless iPod Dock. LINK LINK STAND BY STAND LINK BY LINK STAND BY CHAR GE LINK STAND BY CHAR GE STAND BY CHAR GE LINK CHAR GE CHAR STAN GE DBY CHA RGE Ambient operating conditions: Ambient temperature 41°F-95°F Humidity 10-75% Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.