FULL MANUAL HW-N450 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). •• To prevent injury, this apparatus must be NO USER-SERVICEABLE PARTS ARE INSIDE. securely attached to the floor/wall in REFER SERVICING TO QUALIFIED SERVICE accordance with the installation instructions. PERSONNEL.
Radiation Exposure Statement 10. Protect the power cord from being walked This equipment complies with IC RSS-102 on or pinched particularly at plugs, radiation exposure limits set forth for an convenience receptacles, and the point uncontrolled environment. where they exit from the apparatus. This equipment should be installed and operated 11. Only use attachments/accessories specified with minimum distance 20 cm between the by the manufacturer. radiator & your body. 12.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the Full Manual on Samsung’s on-line customer support center by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.
CONTENTS 01 Checking the Components 2 Inserting Batteries before using the Remote Control (AA batteries X 2) -------------------------- 2 02 03 04 05 06 Product Overview 3 Front Panel / Right Side Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer
07 08 09 10 Connecting a Mobile Device 18 Connecting via Bluetooth -------------------------- 18 Using the Samsung Audio Remote App –– Installing the Samsung Audio Remote App –– Launching the Samsung Audio Remote App -------------------------- 21 -------------------------- 21 -------------------------- 21 Using the Remote Control 22 How to Use the Remote Control -------------------------- 22 Adjusting the Soundbar volume with a TV remote control -------------------------- 25
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 2 Power Cord (Subwoofer) AC/DC Adapter (Main Unit) Subwoofer Remote Control / Batteries Power Cord (AC/DC Adapter) Optical Cable 3 •• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) •• The power components are labelled (1, 2, 3). For more information about power connections, see page 5.
02 PRODUCT OVERVIEW Front Panel / Right Side Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Right Side of the Soundbar Display Displays the product’s status and current mode. +/- (Volume) Button Adjusts the volume. •• When adjusted, the volume level appears on the Soundbar’s front display. (Source) Button Selects the source input mode. Input mode Display Optical Digital input D.IN ARC (HDMI OUT) input D.
Bottom Panel of the Soundbar DIGITAL AUDIO IN (OPTICAL) HDMI IN HDMI IN USB (5V 0.5A) AUX IN HDMI OUT HDMI OUT (TV-ARC) (TV-ARC) DIGITAL AUDIO IN (OPTICAL) HDMI IN DC 24V DC 24V USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device. USB (5V 0.5A) Connect a USB device here to play music files on the USB device through the Soundbar. AUX IN Connect to the Analog output of an external device.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2, 3) to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1 Connect the power cord to the Subwoofer. 2 Connect the power output cable to the power adapter, and then to the Soundbar. 3 Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear will be Red after blinking Blue several times. •• If you use a device that uses the same frequency (5.
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-8500S user manual.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
Auto Power Link Auto Power Link automatically turns on the Soundbar when the TV is turned on. 1. Connect the Soundbar and a TV with a digital optical cable. 2. Press the (Source) button on the right side panel or on the remote control, and then select “D.IN”. 3. Press the Left button on the remote control (the blue spot in the illustration to the right) for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable (not supplied) is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. NOTES •• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. •• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
If the device fails to connect •• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Nxxx N-Series”) appears in the list, delete it. •• Then repeat steps 1 through 3. NOTE •• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect. Disconnecting the Soundbar from the TV Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an Optical or Analog Audio (AUX) Cable Right Side of the Soundbar BD / DVD player / Set-top box / Game console OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) Optical Cable R - AUDIO - L USB (5V 0.
Connecting using an HDMI Cable Bottom of the Soundbar HDMI OUT External Device HDMI IN HDMI Cable (not supplied) HDMI OUT (TV-ARC) HDMI IN (ARC) HDMI Cable (not supplied) HDMI Right Side of the Soundbar 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on your TV. 3.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. Display USB port DIGITAL AUDIO IN (OPTICAL) DC 24V HDMI IN USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) USB USB (5V 0.5A) Micro USB to USB adapter Cable (not supplied) 1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 16KHz ~ 48KHz 80kbps~320kbps MPEG 1 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2.5 Layer3 16KHz ~ 48KHz 80kbps~320kbps Wave_Format_MSAudio1 16KHz ~ 48KHz 56kbps~128kbps Wave_Format_MSAudio2 16KHz ~ 48KHz 56kbps~128kbps AAC 16KHz ~ 96KHz 48kbps~320kbps AAC-LC 16KHz ~ 96KHz 128kbps~192kbps 5.1ch 320kbps HE-AAC 24KHz ~ 96KHz 48kbps~64kbps 5.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the right side panel and then select “BT”. Change “BT” to “BT READY”. b.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the right side of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the right side panel or on the remote control, and then change to any mode except “BT”.
Using the Samsung Audio Remote App Installing the Samsung Audio Remote App To control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio Remote app from the Google Play store. Market search : Samsung Audio Remote Launching the Samsung Audio Remote App To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device, and then follow the directions on the screen.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. Mute SOUND MODE VOL WOOFER •• BT PAIRING mode To turn on “BT PAIRING” mode, press and hold the (Source) button for more than 5 seconds.
Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display. You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list. PAIR Bluetooth PAIR SOUND MODE Play / Pause VOL WOOFER PAIR SOUND MODE Press the p button to pause a music file temporarily. When you press the button again, the music file plays. •• Auto Power Down Function The unit turns off automatically in the following situations. –– D.
•• Volume restriction function Because it may damage hearing when the power is turned on at high volumes, it adjusts the volume to 20 when the set volume is higher than 20. –– The default value for Volume restriction is off. The set volume is maintained even when the power is turned off. –– To change the setting, press and hold the Down button on the remote control for 5 seconds. With the volume restriction off, “V FREE” appears on the front display and with the function on, “V LOCK” appears.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER TV remote control On/Off (Standby) page 25 BT Pairing page 22 Auto Power Down On/Off (AUX mode) page 23 Initialize (Standby) page 30 BT Ready page 13 Left Auto Power Link ON/OFF page 23 Right Anynet+ ON/OFF page 23 Up ID SET page 23 Down Volume restriction On/Off page 24 7 Band EQ page 24 DRC ON/OFF (Standby) page 22 Bluetooth Power page 22 (Sourc
09 INSTALLING THE WALL MOUNT Wallmount Components Installation Precautions Wall Mount Guide •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce Holder-Screw (2 EA) Screw (2 EA) the wall or choose another installation point. •• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.).
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 SOFTWARE UPDATE Samsung may offer updates for the Soundbar’s system firmware in the future. USB port DIGITAL AUDIO IN (OPTICAL) DC 24V HDMI IN USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) USB (5V 0.5A) 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely Micro USB to USB adapter Cable (not supplied) on the Holder-Screws.
Updating Procedure If UPDATE is not displayed 1. Connect a Micro USB to USB adapter cable 1. Turn off the Soundbar, disconnect and then with a male USB 2.0 Micro USB plug (Type B) reconnect the USB storage device that on one end and a standard female 2.0 USB contains the update files to the Soundbar’s jack (Type A) on the other end to the micro USB port. USB jack on your Soundbar. 2.
11 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ;; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ;; See the Bluetooth connection sections on pages 12 and 18. Sound is not produced.
12 LICENSE 13 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. (oss.request@samsung.com). 14 IMPORTANT NOTES ABOUT SERVICE Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.
15 SPECIFICATIONS AND GUIDE Specifications Model Name HW-N450 USB 5V/0.5A Weight 4.9 lbs (2.2 kg) 35.6 x 2.2 x 3.2 inches Dimensions(W x H x D) (904.0 x 55.0 x 80.0 mm) Operating Temperature Range +41°F to +95°F (+5°C to +35°C) Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power 40W x 4 Supported play formats LPCM 2ch, Dolby Audio™ (DTS 2.0 sound is played in DTS format.) (supporting Dolby® Digital), DTS Subwoofer Name PS-WN20 Weight 12.6 lbs (5.7 kg) 8.7 x 14.5 x 11.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
© 2018 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Country Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.
MANUEL COMPLET HW-N450 Imaginez les possibilités Merci d’avoir choisi un appareil Samsung. Pour recevoir une assistance plus complète, veuillez enregistrer votre produit sur www.samsung.
INFORMATIONS RELATIVES À LA SÉCURITÉ AVERTISSEMENTS AVERTISSEMENT •• Afin de diminuer les risques d’incendie ou de POUR ÉVITER LES RISQUES DE CHOC choc électrique, n’exposez pas cet appareil à ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT. la pluie ou à l’humidité. L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR. S’ADRESSER À •• Pour éviter des blessures, cet appareil doit être solidement fixé au plancher/au mur UN SERVICE APRÈS-VENTE QUALIFIÉ.
Declaration d’exposition aux radiations: 10. Placez le cordon d’alimentation de sorte qu’il Cet equipement est conforme aux limites ne puisse être ni piétiné ni pincé, d’exposition aux rayonnements IC RSS-102 particulièrement au niveau de la fiche, de la etablies pour un environnement non controle. prise de courant et du point de sortie de Cet equipement doit etre installe et utilise avec l’appareil. un minimum de 20 cm de distance entre la source 11.
PRÉCAUTIONS 5. Les piles utilisées dans ce produit peuvent contenir des produits chimiques dangereux pour l’environnement. Ne jetez pas les piles 1. Assurez-vous que le bloc d’alimentation CA chez vous est conforme aux exigences de puissance figurant sur la plaque d’identification située à l’arrière de votre produit. Installez votre produit horizontalement, sur un socle approprié (meuble), en laissant un espace suffisant pour la ventilation sur le pourtour 3~4 po.
À PROPOS DE CE MANUEL Le manuel utilisateur se compose de deux éléments : la version papier simplifiée du MANUEL UTILISATEUR et un MANUEL COMPLET détaillé que vous pouvez télécharger. MANUEL UTILISATEUR Consultez ce manuel pour obtenir des instructions relatives à la sécurité, ainsi que des informations sur l’installation du produit, les composants, les connexions et les caractéristiques du produit.
SOMMAIRE 01 Vérification des Composants Insertion des piles avant d’utiliser la télécommande (2 piles AA) 02 03 Présentation du Produit 2 -------------------------- 2 3 Face avant/Face latérale droite du Soundbar -------------------------- 3 Face arrière du Soundbar -------------------------- 4 Branchement du Soundbar Branchement de l’alimentation 5 -------------------------- 5 Raccordement du Soundbar au caisson de basses -------------------------- 6 –– Raccordement automatique
07 08 Branchement d’un Appareil Mobile 18 Connexion par Bluetooth -------------------------- 18 Utilisation de l’application Samsung Audio Remote –– Installation du Samsung Audio Remote application –– Lancement de l’application Samsung Audio Remote -------------------------- 21 -------------------------- 21 -------------------------- 21 Utlisation de la Télécommande Procédure d’utilisation de la télécommande 22 -------------------------- 22 Réglage du volume du Soundbar à l’aide d’un
01 VÉRIFICATION DES COMPOSANTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Unité principale du Soundbar 1 Cordon d’alimentation (Caisson de basses) 2 Adaptateur CA/CC (Unité principale) Caisson de basses Télécommande/Piles 3 Cordon d’alimentation (Adaptateur CA/CC) Câble optique •• Pour obtenir de l’information sur la source d’alimentation et la consommation électrique, veuillez vous reporter à l’étiquette apposée sur le produit.
02 PRÉSENTATION DU PRODUIT Face avant/Face latérale droite du Soundbar Placez le produit de sorte que le logo SAMSUNG soit situé sur le dessus. Face droite du Soundbar Affichage Affiche le statut et le mode actuel du produit. Bouton +/- (volume) Permet de régler le volume. •• Une fois réglé, le volume apparaît sur l’affichage avant du Soundbar. Bouton (Source) Permet de sélectionner le mode d'entrée source. Mode d’entrée Affichage Entrée numérique optique D.
Face arrière du Soundbar DIGITAL AUDIO IN (OPTICAL) HDMI IN HDMI IN USB (5V 0.5A) AUX IN HDMI OUT HDMI OUT (TV-ARC) (TV-ARC) DIGITAL AUDIO IN (OPTICAL) HDMI IN DC 24V DC 24V USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) DIGITAL AUDIO IN (OPTICAL) Se branche à la sortie numérique (optique) d'un périphérique externe. USB (5V 0.5A) Se branche à un périphérique USB pour lire des morceaux de ce périphérique via le Soundbar.
03 BRANCHEMENT DU SOUNDBAR Branchement de l’alimentation Utilisez les composants d’alimentation (1, 2, 3) afin de brancher le caisson de basses et le Soundbar dans une prise électrique dans l’ordre suivant : 1 Raccordez le cordon d’alimentation au caisson de basses. 2 Branchez le câble d’alimentation de sortie dans l’adaptateur d’alimentation puis dans le Soundbar. 3 Raccordez le cordon d'alimentation à une prise murale. Reportez-vous aux illustrations ci-dessous.
Raccordement du Soundbar au caisson de basses Une fois le caisson des basses raccordé, profitez de basses exceptionnelles. Raccordement automatique du caisson des basses et du Soundbar Lorsque vous allumez le produit après avoir branché les câbles d’alimentation sur le Soundbar et le caisson des basses, ce dernier est automatiquement raccordé au Soundbar. •• Une fois l’appariement automatique terminé, les voyants bleus à l’arrière du caisson des basses s’allument.
Connexion manuelle du caisson des basses en cas d’échec de la connexion automatique Avant d’effectuer la procédure de connexion manuelle ci-dessous : •• Vérifiez que les câbles d’alimentation sont correctement branchés sur le Soundbar et le caisson des basses. •• Assurez-vous que le Soundbar est allumé. 1. Appuyez sur le bouton ID SET situé à l’arrière du caisson des basses et maintenez-le appuyé pendant au moins 5 secondes.
REMARQUES •• Ne branchez pas le cordon d’alimentation de ce produit ou de votre téléviseur à une prise murale tant que tous les composants ne sont pas connectés. •• Avant de déplacer ou d’installer ce produit, veillez à couper l’alimentation et à débrancher le cordon d’alimentation. •• Si l’unité principale est mise hors tension, le caisson des basses sans fil passe en mode veille, et la DEL de STANDBY à l’arrière devient rouge après avoir clignoté en bleu plusieurs fois.
2. Vérifiez le statut de veille du module récepteur sans fil après l’avoir branché dans une prise électrique. •• Le voyant LED LINK (voyant bleu) du module récepteur sans fil clignote. Si le voyant ne clignote pas, appuyez sur le bouton ID SET à l’arrière du module de réception sans fil à l’aide de la pointe d’un stylo pendant 5 à 6 secondes, jusqu’à ce que le voyant LED LINK clignote (en bleu). Pour plus d’information sur le voyant LED, veuillez consulter le manuel utilisateur SWA-8500S.
04 BRANCHEMENT À VOTRE TÉLÉVISEUR Diffusez le son de votre téléviseur par le Soundbar à l’aide de connexion filaires ou sans fil. •• Lorsque le Soundbar est connecté à un téléviseur Samsung sélectionné, il peut être contrôlé à l’aide de la télécommande du téléviseur. –– Cette fonction est prise en charge par les téléviseurs Samsung Smart sortis en 2017 ou après et qui prennent en charge le Bluetooth lors de la connexion du Soundbar au téléviseur à l’aide d’un câble optique.
Auto Power Link La fonction Auto Power Link active le Soundbar lorsque le téléviseur est allumé. 1. Connectez le Soundbar et un téléviseur à l’aide d’un câble optique numérique. 2. Appuyez sur le bouton (Source) situé sur la face latérale droite ou sur la télécommande, puis sélectionnez le mode «D.IN». 3. Appuyez sur la touche Gauche de la télécommande (le point bleu sur l’illustration à droite) pendant 5 secondes pour activer ou désactiver la fonction Auto Power Link.
•• Si l’option « TV ARC » ne s’affiche pas sur l’écran du Soundbar, vérifiez que le câble HDMI (non fourni) est connecté au bon port. •• Utilisez les boutons de volume de la télécommande du téléviseur pour régler le volume du Soundbar. REMARQUES •• HDMI est une interface qui permet la transmission numérique de données vidéo et audio avec un seul connecteur. •• Si le téléviseur dispose d’un port ARC, connectez le câble HDMI au port HDMI IN (ARC).
En cas d’échec de la connexion du périphérique •• Si l’entrée correspondant au Soundbar précédemment connecté (par ex., «[AV] Samsung Soundbar Nxxx N-Series») figure dans la liste, supprimez-la. •• Répétez ensuite les étapes 1 à 3. REMARQUE •• Une fois que vous avez connecté le Soundbar à votre téléviseur la première fois, utilisez le mode «BT READY» pour la reconnexion.
05 BRANCHEMENT D’UN PÉRIPHÉRIQUE EXTERNE Établissez une connexion à un périphérique externe à l’aide d’un réseau filaire ou sans fil afin de diffuser le son de celui-ci sur le Soundbar. Connexion à l’aide d’un câble optique ou audio analogue (AUX) Face droite du Soundbar Lecteur BD/DVD / Décodeur / Console de jeu OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) Câble optique R - AUDIO - L USB (5V 0.
Branchement à l’aide d’un câble HDMI Arrière du Soundbar HDMI OUT Périphérique HDMI IN Câble HDMI (non fourni) externe HDMI OUT (TV-ARC) HDMI IN (ARC) Câble HDMI (non fourni) HDMI Face droite du Soundbar 1. Branchez un câble HDMI (non fourni) entre le connecteur HDMI IN situé à l’arrière du produit et le connecteur HDMI OUT de votre périphérique numérique. 2.
06 CONNEXION À UN PÉRIPHÉRIQUE DE STOCKAGE USB Vous pouvez diffuser des morceaux se trouvant sur des périphériques de stockage à l’aide du Soundbar. Affichage Port USB DIGITAL AUDIO IN (OPTICAL) HDMI IN DC 24V USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) USB USB (5V 0.5A) Câble adaptateur Micro USB-USB (non fourni) 1. Branchez un câble adaptateur Micro USB-USB doté d’un connecteur Micro USB-USB 2.0 (type B) sur une extrémité et d’un connecteur USB 2.
Liste de compatibilité Rallonge Codec Taux d’échantillonnage Débit binaire *.mp3 MPEG 1 Layer2 16 KHz à 48 KHz 80 à 320 kbps MPEG 1 Layer3 16 KHz à 48 KHz 80 à 320 kbps MPEG 2 Layer3 16 KHz à 48 KHz 80 à 320 kbps MPEG 2.
07 BRANCHEMENT D’UN APPAREIL MOBILE Connexion par Bluetooth Lorsqu’un appareil mobile est connecté par Bluetooth, vous pouvez profiter du son stéréo sans vous encombrer avec des câbles. •• Vous ne pouvez pas connecter plusieurs périphériques Bluetooth simultanément. PAIR OU Périphérique Bluetooth ND SOUODE M Connexion initiale 1. Appuyez sur le bouton PAIR de la télécommande pour accéder au mode «BT PAIRING». (OU) a. Appuyez sur le bouton (Source) sur le panneau à droite puis sélectionnez «BT».
Quelle est la différence entre BT READY et BT PAIRING ? •• BT READY : Dans ce mode, vous pouvez rechercher les téléviseurs connectés précédemment ou brancher un appareil mobile précédemment connecté dans le Soundbar. •• BT PAIRING : Dans ce mode, vous pouvez connecter un nouvel appareil au Soundbar. (Appuyez sur la touche PAIR sur la télécommande, ou appuyez sur la touche (Source) sur le panneau droit du Soundbar et maintenez-la enfoncée pendant plus de 5 secondes en mode «BT».
Déconnexion d’un périphérique Bluetooth d’un Soundbar Vous pouvez déconnecter le périphérique Bluetooth à partir du système Soundbar. Pour des directives, consultez le manuel d’utilisation du périphérique Bluetooth. •• Le système Soundbar sera déconnecté. •• Lorsque le système Soundbar est déconnecté du périphérique Bluetooth, Soundbar affiche le message «BT DISCONNECTED» sur le panneau avant.
Utilisation de l’application Samsung Audio Remote Installation du Samsung Audio Remote application Pour contrôler la Soundbar avec votre appareil intelligent et le Application Samsung Audio Remote, télécharger le Samsung Audio Remote application de Google Play Store.
08 UTLISATION DE LA TÉLÉCOMMANDE Procédure d’utilisation de la télécommande Permet d'allumer et d'éteindre le Soundbar. Alimentation PAIR Source Mise en sourdine SOUND MODE VOL WOOFER SOUNDBAR VOL Appuyez sur la touche (Mise en sourdine) pour désactiver le son. Appuyez de nouveau sur PAIR la touche pour activer le son. PAIR SOUND MODE Vous pouvez sélectionner l'effet sonore de votre choix parmi STANDARD ou SURROUND.
PAIR Bluetooth PAIR SOUND MODE VOL Appuyez sur la touche PAIR. «BT PAIRING» apparaît sur l'écran du Soundbar. Vous pouvez connecter le Soundbar à un nouvel appareil Bluetooth dans ce mode en sélectionnant le Soundbar dans la liste de recherche de l'appareil Bluetooth. Appuyez sur le bouton p pour mettre temporairement un morceau en pause. Si vous appuyez à nouveau sur le bouton, le morceau est lu.
•• Fonction de limitation du volume L’écoute à volume élevé pouvant endommager l’ouïe, le volume est réglé sur 20 lorsque le volume est réglé sur une valeur supérieure à 20. –– Par défaut, la limitation du volume est désactivée. La valeur définie pour le volume est maintenue même lorsque l’alimentation est coupée. –– Pour modifier le paramètre, appuyez sur la touche Bas de la télécommande pendant 5 secondes.
Réglage du volume du Soundbar à l’aide d’une télécommande de téléviseur 4. Si vous souhaitez retourner au mode par Si vous avez un téléviseur Samsung, vous pouvez régler son volume à l’aide de la télécommande infrarouge fournie avec ce même téléviseur. maintenez-le pendant 5 secondes jusqu’à ce que «SAMSUNG-TV REMOTE» apparaisse 1. Éteignez le Soundbar. BYE 2.
Utilisation des boutons masqués (boutons ayant plusieurs fonctions) Bouton masqué Page de référence Bouton de la télécommande Fonction WOOFER Activer/Désactiver la fonction Télécommande de votre téléviseur (mode veille) page 25 Appariement BT page 22 Activer/Désactiver la fonction Auto Power Down (mode AUX) page 23 Initialiser (mode veille) page 30 (Source) p (Lecture/Pause) Compatible BT page 13 Gauche Auto Power Link ON/OFF page 23 Droite Anynet+ ON/OFF page 23 Haut ID SET page 23
09 INSTALLATION DU SUPPORT MURAL Composantes murales Guide de montage mural Précautions d’installation •• Effectuez l’installation sur un mur vertical uniquement. Vis de support (2 de chaque) •• N’installez pas le produit dans un endroit où la température ou l’humidité sont élevées. Vis (2 de chaque) •• Vérifiez si le mur est suffisamment solide pour supporter le poids du produit. Sinon, renforcez le mur ou choisissez un autre endroit pour l’installation.
2. Alignez la Ligne Centrale du Guide de 5. Poussez une vis (non fournie) dans chaque montage mural sur le centre de votre Vis de support, puis vissez fermement téléviseur (si vous montez le Soundbar sous chaque vis dans un trou de vis de support. ce dernier), puis fixez le Guide de montage mural au mur avec du ruban adhésif. •• Si vous ne l’installez pas sous un téléviseur, placez la Ligne Centrale au centre de la zone d’installation. 6.
7. Installez le Soundbar à l’aide des Support de fixation murale en accrochant ces derniers sur les Vis de support fixées au mur. 10 MISE À JOUR LOGICIELLE Il se peut que Samsung propose ultérieurement des mises à jour pour le micrologiciel du système du Soundbar. Port USB DIGITAL AUDIO IN (OPTICAL) HDMI IN DC 24V USB (5V 0.5A) AUX IN HDMI OUT (TV-ARC) 8. Faites glisser la Soundbar vers le bas, comme illustré ci-dessous, afin que les Équerres de USB (5V 0.
Procédure de mise à jour Si UPDATE ne s’affiche pas 1. Branchez un câble adaptateur Micro USB- 1. Éteignez le Soundbar, débranchez le USB doté d’un connecteur Micro USB-USB périphérique de stockage qui contient les 2.0 (type B) sur une extrémité et d’un fichiers de mise à jour du port USB du connecteur USB 2.0 femelle standard (type A) sur l’autre au connecteur Micro USB de Soundbar, puis rebranchez-le. 2. Débranchez le cordon d’alimentation du votre Soundbar.
11 DÉPANNAGE Avant de contacter l’assistance, effectuez les vérifications suivantes. L’unité ne s’allume pas. Le cordon d’alimentation est-il branché sur la prise? ;; Branchez le cordon d’alimentation sur la prise. Lorsque j’appuie sur un bouton, la fonction ne s’active pas. Y’a-t-il de l’électricité statique dans l’air? ;; Débranchez le cordon d’alimentation et rebranchez-le. Le son est interrompu en mode BT. ;; Reportez-vous aux sections relatives à la connexion Bluetooth aux pages 12 et 18.
12 LICENCE 13 AVIS DE LICENCES LIBRES Pour transmettre des demandes et des questions Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 portant sur les sources ouvertes, communiquez avec Samsung par courriel (oss.request@samsung.com).
15 CARACTÉRISTIQUES ET GUIDE Spécifications Nom de modèle HW-N450 USB 5V/0,5A Poids 4,9 lbs (2,2 kg) 35,6 x 2,2 x 3,2 po Dimensions (L x H x P) (904,0 x 55,0 x 80,0 mm) Plage de températures en fonctionnement +41°F à +95°F (+5°C à +35°C) Plage d’humidité en fonctionnement 10 % à 75 % AMPLIFICATEUR Puissance de sortie nominale 40W x 4 Formats de lecture pris en charge LPCM 2ch, Dolby Audio™ (Le son DTS 2.0 est lu au format DTS.
GARANTIE LIMITÉE À L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication. SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA.
© 2018 Samsung Electronics Co., Ltd. Tous droits réservés. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. SIÈGE SOCIAL Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca_fr/support Country Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.