User's Manual

Using the Control Panel
3.3
Using Control Panel Menus
A number of menus are available to make it easy for you to
change printer settings. The diagram on next column shows the
menus and all of the menu items available in each menu. The
items in each menu and the values you can select are described
in more detail in the tables beginning on page 3.4.
Accessing Control Panel Menus
You can control your printer from the printer’s control panel.
You can also set the control panel menus while the printer is in
use.
1 In ready mode, press the Menu button ( ) until you see
the menu you want on the bottom line of the display.
2 Press the Enter button ( ) to access the menu.
3 Press the scroll button ( or ) until the desired menu
item displays on the bottom line.
4 Press the Enter button ( ) to confirm the selected item.
5 If the selected menu item has sub menus, repeat steps 3
and 4.
6 Press the scroll button ( or ) until the desired setting
option displays on the bottom line, or enter the required
value.
7 Press the Enter button ( ) to save your input or
selection.
An asterisk (
* ) appears next to the selection on the
display, indicating that it is now the default.
8 To exit the menu, press the Upper Level button ( )
repeatedly, or the Cancel button ( ).
After 60 seconds of inactivity (no key being pressed), the
printer automatically returns to ready mode.
N OTE : Print settings made from the printer driver on a
connected computer override the settings on the control panel.
Overview of Control Panel Menus
The control panel menus are used to configure the printer. The
control panel provides access to the following menus:
EPSON/IBM/IBM
(See page 3.9.)
Font
Auto Wrap
Character Set
Character Tab..
LPI
Pitch
Network******
(See page 3.9.)
Config Network
Config TCP
IP Get Method
IP Address
Subnet Mask
Gateway
Config 802.11b
AppleTalk
Netware
Config Netware
IPX Frame Type
Reset Network
Default Set
Print Net CFG
PostScript
(See page 3.9.)
Print PS Error
*:Available when your printer is printing a file from an optional hard disk.
**: Available when there is a file stored in an optional hard disk.
***: Available when your printer has an optional hard disk.
****: Available when an optional duplex unit is installed in your printer.
*****: Available when an optional serial interface card is installed in your printer.
******: Available when a network card is installed in your printer. (ML-3561N, ML-3561ND or ML-3562W, or
ML-3560 with an optional network card)
Stored Job **
(See page 9.6.)
User Name
Job Name
Active Job *
(See page 9.6.)
User Name
Job Name
Information
(See page 3.4.)
Configuration
Menu Map
Demo Page
Stored Job List***
Event Log***
Usage Page***
Completed Job***
PS3 Font List
PCL Font List
EPSON Fonts
IBM Fonts
Paper
(See page 3.4.)
Tray Source
Media Size
Custom Width
Custom Height
Media Type
Tray Chaining
Graphics
(See page 3.6.)
Resolution
Image Enhance
Toner S ave
Density
Layout
(See page 3.5.)
Orientation
Duplex****
Duplex Margin****
Simplex Margin
Copies
Setup
(See page 3.7.)
Date & Time***
Fixed Overlay***
Sel. 1st. Form***
Sel. 2nd. Form***
LCD Language
Emulation
Power Save
Auto Continue
Jam Recovery
Altitude Adj.
Auto CR
Job Time Out
RS-232C*****
Maintenance
PCL
(See page 3.8.)
Typeface
Symbol
Lines
Pitch
Point Size
Courier
Printer
(See page 3.7.)
Default Set
Current Job