User's Manual

Using the Control Panel
3.5
Media Type
The Media Type setting lets you specify the type
of print material you are using to get the best
result.
•
Plain Paper : Select for plain paper.
•
Thick : Select for thick paper
• Thin : Select for thin paper
• Bond : Select for thick paper.
•
Color Paper : Select for colored paper.
• Card Stock : Select for card stocks.
• Labels : Select for labels.
•
Transparency : Select for transparencies.
• Envelope : Select for envelops.
• Preprinted : Preprinted is for paper with
something else printed on it, such as
letterhead.
Tray Chaining
When you select any other value except Auto
Select
from Tray Source and the selected
tray is empty, the printer automatically prints
from other trays.
If this menu item is set to
Off , the
On Line/Continue button backlight blinks in
orange and the printer doesn’t work until you
insert paper into the specified tray.
Item Explanation
Values: Off*, Plain Paper, Thick, Thin, Bond,
Color Paper, Card Stock, Labels,
Transparency, Envelope, Preprinted
Values: Off, On*
Layout Menu
Use the Layout menu to define all settings relating to output.
(*: the default setting)
Item Explanation
Orientation
Choose the default orientation of print image
on the page.
Duplex
To print on both sides of paper, choose the
binding edge as follows.
• Long Edge : Flip on long edge. Prints
pages to read like a book.
•
Short Edge : Flip on short edge. Prints
pages to read by flipping over like a note
pad.
Select
Off to print on one side of paper.
N OTE : This menu item is available only
when you install an optional duplex unit.
Values: Portrait*, Landscape
Portrait
Landscape
Values: Off*, Long Edge, Short Edge
Long Edge in the
Portrait orientation
Long Edge in the
Landscape orientation
25
3
2
5
3
2
5
3
2
5
3
Short Edge in the
Landscape orientation
Short Edge in the
Portrait orientation